Lines Matching refs:efuse
35 efuse: (see Optional properties)
36 RBB enable efuse Mask: (See Optional properties)
37 FBB enable efuse Mask: (See Optional properties)
38 Vset value efuse Mask: (See Optional properties)
47 - "efuse-address" - Contains efuse base address used to pick up ABB info.
49 "efuse-address" is required for this.
55 efuse: Mandatory if 'efuse-address' register is defined. Provides offset
56 from efuse-address to pick up ABB characteristics. Set to 0 if
57 'efuse-address' is not defined.
58 RBB enable efuse Mask: Optional if 'efuse-address' register is defined.
59 'ABB mode' is force set to RBB mode if value at "efuse-address"
60 + efuse maps to RBB mask. Set to 0 to ignore this.
61 FBB enable efuse Mask: Optional if 'efuse-address' register is defined.
62 'ABB mode' is force set to FBB mode if value at "efuse-address"
63 + efuse maps to FBB mask (valid only if RBB mask does not match)
65 Vset value efuse Mask: Mandatory if ldo-address is set. Picks up from
66 efuse the value to set in 'ti,ldovbb-vset-mask' at ldo-address.
68 Example #1: Simplest configuration (no efuse data, hard coded ABB table):
81 /* uV ABB efuse rbb_m fbb_m vset_m */
95 reg-names = "base-address", "int-address", "efuse-address";
101 /* uV ABB efuse rbb_m fbb_m vset_m */
118 "efuse-address", "ldo-address";
128 /* uV ABB efuse rbb_m fbb_m vset_m */