Lines Matching refs:PHY

1 Device tree bindings for HiSilicon INNO USB2 PHY
7 - reg: Should be the address space for PHY configuration register in peripheral
9 - clocks: The phandle and clock specifier pair for INNO USB2 PHY device
11 - resets: The phandle and reset specifier pair for INNO USB2 PHY device reset
16 The INNO USB2 PHY device should be a child node of peripheral controller that
17 contains the PHY configuration register, and each device suppports up to 2 PHY
18 ports which are represented as child nodes of INNO USB2 PHY device.
20 Required properties for PHY port node:
21 - reg: The PHY port instance number.
22 - #phy-cells: Defined by generic PHY bindings.  Must be 0.
23 - resets: The phandle and reset specifier pair for PHY port reset signal.
25 Refer to phy/phy-bindings.txt for the generic PHY binding properties