Lines Matching refs:skew

14   All skew control options are specified in picoseconds. The minimum
17   skew values actually increase in 120ps steps, starting from -840ps. The
23   The following table shows the actual skew delay you will get for each of the
25   corresponding pad skew register:
48     - rxc-skew-ps : Skew control of RXC pad
49     - rxdv-skew-ps : Skew control of RX CTL pad
50     - txc-skew-ps : Skew control of TXC pad
51     - txen-skew-ps : Skew control of TX CTL pad
52     - rxd0-skew-ps : Skew control of RX data 0 pad
53     - rxd1-skew-ps : Skew control of RX data 1 pad
54     - rxd2-skew-ps : Skew control of RX data 2 pad
55     - rxd3-skew-ps : Skew control of RX data 3 pad
56     - txd0-skew-ps : Skew control of TX data 0 pad
57     - txd1-skew-ps : Skew control of TX data 1 pad
58     - txd2-skew-ps : Skew control of TX data 2 pad
59     - txd3-skew-ps : Skew control of TX data 3 pad
63   All skew control options are specified in picoseconds. The minimum
66   rxc-skew-ps=<0> actually results in -900 picoseconds adjustment.
68   The KSZ9031 hardware supports a range of skew values from negative to
74   The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps.
111   The following 4-bit values table apply to the txdX-skew-ps, rxdX-skew-ps
112   data pads, and the rxdv-skew-ps, txen-skew-ps control pads.
137       - rxc-skew-ps : Skew control of RX clock pad
138       - txc-skew-ps : Skew control of TX clock pad
142       - rxdv-skew-ps : Skew control of RX CTL pad
143       - txen-skew-ps : Skew control of TX CTL pad
144       - rxd0-skew-ps : Skew control of RX data 0 pad
145       - rxd1-skew-ps : Skew control of RX data 1 pad
146       - rxd2-skew-ps : Skew control of RX data 2 pad
147       - rxd3-skew-ps : Skew control of RX data 3 pad
148       - txd0-skew-ps : Skew control of TX data 0 pad
149       - txd1-skew-ps : Skew control of TX data 1 pad
150       - txd2-skew-ps : Skew control of TX data 2 pad
151       - txd3-skew-ps : Skew control of TX data 3 pad
162   All skew control options are specified in picoseconds. The increment
164   A negative value can be assigned as rxc-skew-psec = <(-100)>;.
170       - rxc-skew-psec : Skew control of RX clock pad
171       - txc-skew-psec : Skew control of TX clock pad
175       - rxdv-skew-psec : Skew control of RX CTL pad
176       - txen-skew-psec : Skew control of TX CTL pad
177       - rxd0-skew-psec : Skew control of RX data 0 pad
178       - rxd1-skew-psec : Skew control of RX data 1 pad
179       - rxd2-skew-psec : Skew control of RX data 2 pad
180       - rxd3-skew-psec : Skew control of RX data 3 pad
181       - txd0-skew-psec : Skew control of TX data 0 pad
182       - txd1-skew-psec : Skew control of TX data 1 pad
183       - txd2-skew-psec : Skew control of TX data 2 pad
184       - txd3-skew-psec : Skew control of TX data 3 pad
190 		rxc-skew-ps = <1800>;
191 		rxdv-skew-ps = <0>;
192 		txc-skew-ps = <1800>;
193 		txen-skew-ps = <0>;
200 			rxc-skew-ps = <1800>;
201 			rxdv-skew-ps = <0>;
202 			txc-skew-ps = <1800>;
203 			txen-skew-ps = <0>;