Lines Matching refs:pmic
20 - reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
26 - max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used
29 - max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used
32 - max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from
36 - max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from
40 - max8998,pmic-buck-voltage-lock: If present, disallows changing of
43 Additional properties required if max8998,pmic-buck1-dvs-gpios is defined:
44 - max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts
47 Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
48 - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
84 pmic@66 {
85 compatible = "maxim,max8998-pmic";
91 max8998,pmic-buck1-default-dvs-idx = <0>;
92 max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
94 max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
98 max8998,pmic-buck2-default-dvs-idx = <0>;
99 max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
100 max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;