Lines Matching refs:RW

5 Description:	(RW) Enable/disable tracing on this specific trace entiry.
90 Description: 	(RW) Controls various modes supported by this ETM, for example
98 Description: 	(RW) Controls which PE to trace.
104 Description: 	(RW) Controls the tracing of arbitrary events from bank 0 to 3.
110 Description: 	(RW) Controls the behavior of the events in bank 0 to 3.
116 Description: 	(RW) Controls the insertion of global timestamps in the trace
123 Description: 	(RW) Controls how often trace synchronization requests occur.
129 Description: 	(RW) Sets the threshold value for cycle counting.
135 Description: 	(RW) Controls which regions in the memory map are enabled to
142 Description: 	(RW) Controls instruction trace filtering.
148 Description: 	(RW) In Secure state, each bit controls whether instruction
155 Description: 	(RW) In non-secure state, each bit controls whether instruction
162 Description: 	(RW) Select which address comparator or pair (of comparators) to
169 Description: 	(RW) Controls what type of comparison the trace unit performs.
175 Description: 	(RW) Used to setup single address comparator values.
181 Description: 	(RW) Used to setup address range comparator values.
187 Description: 	(RW) Select which sequensor.
193 Description: 	(RW) Use this to set, or read, the sequencer state.
199 Description: 	(RW) Moves the sequencer state to a specific state.
205 Description: 	(RW) Moves the sequencer to state 0 when a programmed event
212 Description: 	(RW) Select which counter unit to work with.
218 Description: 	(RW) This sets or returns the reload count value of the
225 Description: 	(RW) This sets or returns the current count value of the
232 Description: 	(RW) Controls the operation of the selected counter.
238 Description: 	(RW) Select which resource selection unit to work with.
244 Description: 	(RW) Controls the selection of the resources in the trace unit.
250 Description:	(RW) Select which context ID comparator to work with.
256 Description:	(RW) Get/Set the context ID comparator value to trigger on.
262 Description:	(RW) Mask for all 8 context ID comparator value
269 Description:	(RW) Select which virtual machine ID comparator to work with.
275 Description:	(RW) Get/Set the virtual machine ID comparator value to
282 Description:	(RW) Mask for all 8 virtual machine ID comparator value
289 Description:	(RW) Set the Exception Level matching bits for secure and
296 Description:	(RW) Access the start stop control register for PE input
310 Description:	(RW) Select the single shot control register to access.
316 Description:	(RW) Access the selected single shot control register.
329 Description:	(RW) Access the selected single show PE comparator control