85 		e_dbg("Error getting PHY ID\n");  in e1000_init_phy_params_82571()
111 		e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);  in e1000_init_phy_params_82571()
302 			e_dbg("Please update your 82571 Bootagent\n");  in e1000_init_mac_params_82571()
462 		e_dbg("Driver can't access device - SMBI bit is set.\n");  in e1000_get_hw_semaphore_82571()
480 		e_dbg("Driver can't access the NVM\n");  in e1000_get_hw_semaphore_82571()
530 		e_dbg("Driver can't access the PHY\n");  in e1000_get_hw_semaphore_82573()
817 		e_dbg("nvm parameter(s) out of bounds\n");  in e1000_write_nvm_eewr_82571()
857 		e_dbg("MNG configuration cycle has not completed.\n");  in e1000_get_cfg_done_82571()
953 		e_dbg("PCI-E Master disable polling has failed.\n");  in e1000_reset_hw_82571()
955 	e_dbg("Masking off all interrupts\n");  in e1000_reset_hw_82571()
983 	e_dbg("Issuing a global reset to MAC\n");  in e1000_reset_hw_82571()
1079 		e_dbg("Error initializing identification LED\n");  in e1000_init_hw_82571()
1082 	e_dbg("Initializing the IEEE VLAN\n");  in e1000_init_hw_82571()
1095 	e_dbg("Zeroing the MTA\n");  in e1000_init_hw_82571()
1524 				e_dbg("AN_UP     -> AN_PROG\n");  in e1000_check_for_serdes_link_82571()
1543 				e_dbg("FORCED_UP -> AN_PROG\n");  in e1000_check_for_serdes_link_82571()
1558 					e_dbg("AN_PROG   -> AN_UP\n");  in e1000_check_for_serdes_link_82571()
1564 					e_dbg("AN_PROG   -> DOWN\n");  in e1000_check_for_serdes_link_82571()
1578 					e_dbg("Error config flow control\n");  in e1000_check_for_serdes_link_82571()
1584 				e_dbg("AN_PROG   -> FORCED_UP\n");  in e1000_check_for_serdes_link_82571()
1599 			e_dbg("DOWN      -> AN_PROG\n");  in e1000_check_for_serdes_link_82571()
1606 			e_dbg("ANYSTATE  -> DOWN\n");  in e1000_check_for_serdes_link_82571()
1623 					e_dbg("ANYSTATE  -> DOWN\n");  in e1000_check_for_serdes_link_82571()
1635 				e_dbg("ANYSTATE  -> AN_PROG\n");  in e1000_check_for_serdes_link_82571()
1657 		e_dbg("NVM Read Error\n");  in e1000_valid_led_default_82571()