Lines Matching refs:CS8900

4 Cirrus Logic LAN CS8900/CS8920 Ethernet Adapters
24    1.0 CIRRUS LOGIC LAN CS8900/CS8920 ETHERNET ADAPTERS
33 	2.1 CS8900-based Adapter Configuration
59 1. Cirrus Logic LAN CS8900/CS8920 Ethernet Adapters
66 The CS8900-based ISA Ethernet Adapters from Cirrus Logic follow
73 CS8920-based adapters are similar to the CS8900-based adapter with additional
83 The CS8900/CS8920 Ethernet Adapter driver for Linux supports the Linux
111    * Cirrus Logic LAN (CS8900/20-based) Ethernet ISA Adapter
116      * One available IRQ (5,10,11,or 12 for the CS8900, 3-7,9-15 for CS8920).
125    * CS8900/20 Setup Utility (DOS-based)
154 Both the CS8900 and CS8920-based adapters can be configured using parameters
155 stored in an on-board EEPROM. You must use the DOS-based CS8900/20 Setup
163 Since the CS8900/20 Setup Utility is a DOS-based application, you must install
164 and configure the adapter in a DOS-based system using the CS8900/20 Setup
166 installing a CS8900-based adapter and the default configuration is acceptable.)
169 2.1. CS8900-based Adapter Configuration
172 CS8900-based adapters shipped from Cirrus Logic have been configured
187 CS8900/20 Setup Utility.
196 run the CS8900/20 Setup Utility to disable PnP and configure the
208 	* RUN THE CS8900/20 SETUP UTILITY TO DISABLE PnP SUPPORT AND   *
284    * CS8900 defaults to half-duplex if not specified on command-line
383 the CS8900/20 Setup Utility can be used to test the functionality of the
388 CS8900/20-based adapter card (it must also be running the CS8900/20 Setup
398 To run the diagnostics tests on the CS8900/20 adapter:
400    1.  Boot DOS on the PC and start the CS8900/20 Setup Utility.
419      The IO Register Read/Write test insures that the CS8900/20 can be
424      The Shared Memory test insures the CS8900/20 can be accessed in memory
439      The Chip RAM test insures the 4K of memory internal to the CS8900/20 is
467 transferring data between two CS8900/20 adapters installed in different PCs
471 This test requires that each of the two PCs have a CS8900/20-based adapter
472 installed and have the CS8900/20 Setup Utility running.  The first PC is
484     1.  Select a PC with a CS8900/20-based adapter and a known working network
485 	connection to act as the Responder.  Run the CS8900/20 Setup Utility
489     2.  Return to the PC with the CS8900/20-based adapter you want to test and
490 	start the CS8900/20 Setup Utility.
521 of four ways after installing and or configuring the CS8900/20-based adapter:
534 If an IO conflict occurs, run the CS8900/20 Setup Utility and perform a
542 CS8900/20 Setup Utility.  Once reinstalled in the target system, run the