Lines Matching refs:EDID

422 For HDMI inputs it is possible to set the EDID. By default a simple EDID
423 is provided. You can only set the EDID for HDMI inputs. Internally, however,
424 the EDID is shared between all HDMI inputs.
426 No interpretation is done of the EDID data with the exception of the
430 reduced to 15) since that's the limitation of the EDID physical address.
473 An HDMI output has a valid EDID which can be obtained through VIDIOC_G_EDID.
476 reduced to 15) since that's the limitation of the EDID physical address. See
824 - Maximum EDID Blocks:
826 	determines how many EDID blocks the driver supports.
827 	Note that the vivid driver does not actually interpret new EDID
828 	data, it just stores it. It allows for up to 256 EDID blocks
1371 The EDID that each output reads reports a unique CEC physical address that is
1372 based on the physical address of the EDID of the input. So if the EDID of the
1373 receiver has physical address A.B.0.0, then each output will see an EDID
1402 - Changing the EDID should cause hotplug detect emulation to happen.