Lines Matching refs:dprintk
54 #define dprintk(x, y, z, format, arg...) do { \ macro
94 dprintk(verbose, DST_INFO, 1, "mask=[%04x], enbb=[%04x], outhigh=[%04x]", mask, enbb, outhigh); in dst_gpio_outb()
96 …dprintk(verbose, DST_INFO, 1, "dst_gpio_enb error (err == %i, mask == %02x, enb == %02x)", err, ma… in dst_gpio_outb()
108 …dprintk(verbose, DST_INFO, 1, "dst_gpio_outb error (err == %i, enbb == %02x, outhigh == %02x)", er… in dst_gpio_outb()
122 dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb error (err == %i)", err); in dst_gpio_inb()
132 dprintk(verbose, DST_INFO, 1, "Resetting state machine"); in rdc_reset_state()
134 dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); in rdc_reset_state()
139 dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); in rdc_reset_state()
150 dprintk(verbose, DST_DEBUG, 1, "Resetting DST"); in rdc_8820_reset()
152 dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); in rdc_8820_reset()
157 dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); in rdc_8820_reset()
167 dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); in dst_pio_enable()
178 dprintk(verbose, DST_ERROR, 1, "dst_gpio_outb ERROR !"); in dst_pio_disable()
195 dprintk(verbose, DST_ERROR, 1, "dst_gpio_inb ERROR !"); in dst_wait_dst_ready()
199 dprintk(verbose, DST_INFO, 1, "dst wait ready after %d", i); in dst_wait_dst_ready()
204 dprintk(verbose, DST_NOTICE, 1, "dst wait NOT ready after %d", i); in dst_wait_dst_ready()
212 dprintk(verbose, DST_NOTICE, 1, "Trying to return from previous errors."); in dst_error_recovery()
224 dprintk(verbose, DST_INFO, 1, "Trying to bailout from previous error."); in dst_error_bailout()
235 dprintk(verbose, DST_INFO, 1, "Initializing DST."); in dst_comm_init()
237 dprintk(verbose, DST_ERROR, 1, "PIO Enable Failed"); in dst_comm_init()
241 dprintk(verbose, DST_ERROR, 1, "RDC 8820 State RESET Failed."); in dst_comm_init()
265 dprintk(verbose, DST_NOTICE, 0, "writing [ "); in write_dst()
267 dprintk(verbose, DST_NOTICE, 0, "%02x ", data[i]); in write_dst()
268 dprintk(verbose, DST_NOTICE, 0, "]\n"); in write_dst()
272 …dprintk(verbose, DST_INFO, 1, "_write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, le… in write_dst()
279 dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET"); in write_dst()
303 …dprintk(verbose, DST_INFO, 1, "read_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)", err, len,… in read_dst()
310 dprintk(verbose, DST_INFO, 1, "RDC 8820 RESET"); in read_dst()
315 dprintk(verbose, DST_DEBUG, 1, "reply is 0x%x", ret[0]); in read_dst()
317 dprintk(verbose, DST_DEBUG, 0, " 0x%x", ret[err]); in read_dst()
319 dprintk(verbose, DST_DEBUG, 0, "\n"); in read_dst()
329 dprintk(verbose, DST_INFO, 1, "Polarization=[Vertical]"); in dst_set_polarization()
333 dprintk(verbose, DST_INFO, 1, "Polarization=[Horizontal]"); in dst_set_polarization()
346 dprintk(verbose, DST_INFO, 1, "set Frequency %u", freq); in dst_set_freq()
465 dprintk(verbose, DST_INFO, 1, "set symrate %u", srate); in dst_set_symbolrate()
473 dprintk(verbose, DST_INFO, 1, "set symcalc %u", symcalc); in dst_set_symbolrate()
488 dprintk(verbose, DST_DEBUG, 1, "%s", state->fw_name); in dst_set_symbolrate()
562 dprintk(verbose, DST_ERROR, 0, "DST type flags :"); in dst_type_flags_print()
564 dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner", DST_TYPE_HAS_TS188); in dst_type_flags_print()
566 dprintk(verbose, DST_ERROR, 0, " 0x%x newtuner 2", DST_TYPE_HAS_NEWTUNE_2); in dst_type_flags_print()
568 dprintk(verbose, DST_ERROR, 0, " 0x%x ts204", DST_TYPE_HAS_TS204); in dst_type_flags_print()
570 dprintk(verbose, DST_ERROR, 0, " 0x%x VLF", DST_TYPE_HAS_VLF); in dst_type_flags_print()
572 dprintk(verbose, DST_ERROR, 0, " 0x%x symdiv", DST_TYPE_HAS_SYMDIV); in dst_type_flags_print()
574 dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 1", DST_TYPE_HAS_FW_1); in dst_type_flags_print()
576 dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 2", DST_TYPE_HAS_FW_2); in dst_type_flags_print()
578 dprintk(verbose, DST_ERROR, 0, " 0x%x firmware version = 3", DST_TYPE_HAS_FW_3); in dst_type_flags_print()
579 dprintk(verbose, DST_ERROR, 0, "\n"); in dst_type_flags_print()
604 dprintk(verbose, DST_INFO, 1, "invalid dst type %d", type); in dst_type_print()
607 dprintk(verbose, DST_INFO, 1, "DST type: %s", otype); in dst_type_print()
915 dprintk(verbose, DST_INFO, 1, "Unsupported Command"); in dst_get_mac()
920 dprintk(verbose, DST_ERROR, 1, "MAC Address=[%pM]", state->mac_address); in dst_get_mac()
930 dprintk(verbose, DST_INFO, 1, "Unsupported Command"); in dst_fw_ver()
934 dprintk(verbose, DST_ERROR, 1, "Firmware Ver = %x.%x Build = %02x, on %x:%x, %x-%x-20%02x", in dst_fw_ver()
951 dprintk(verbose, DST_INFO, 1, "Unsupported Command"); in dst_card_type()
956 dprintk(verbose, DST_ERROR, 1, "Device Model=[%s]", &state->card_info[0]); in dst_card_type()
961 dprintk(verbose, DST_ERROR, 1, "DST has [%s] tuner, tuner type=[%d]", in dst_card_type()
974 dprintk(verbose, DST_INFO, 1, "Unsupported Command"); in dst_get_vendor()
979 dprintk(verbose, DST_ERROR, 1, "Vendor=[%s]", &state->vendor[0]); in dst_get_vendor()
1002 dprintk(verbose, DST_ERROR, 1, "Cmd=[0x04] failed"); in dst_check_stv0299()
1008 dprintk(verbose, DST_ERROR, 1, "Found a STV0299 NIM"); in dst_check_stv0299()
1022 dprintk(verbose, DST_ERROR, 1, "Cmd=[0x10], failed"); in dst_check_mb86a15()
1028 dprintk(verbose, DST_ERROR, 1, "Found a MB86A15 NIM"); in dst_check_mb86a15()
1043 dprintk(verbose, DST_ERROR, 1, "DST TYpe = MULTI FE"); in dst_get_tuner_info()
1046 dprintk(verbose, DST_INFO, 1, "Cmd=[0x13], Unsupported"); in dst_get_tuner_info()
1051 dprintk(verbose, DST_INFO, 1, "Cmd=[0xb], Unsupported"); in dst_get_tuner_info()
1057 dprintk(verbose, DST_ERROR, 1, "DST type has TS=188"); in dst_get_tuner_info()
1067 dprintk(verbose, DST_ERROR, 1, "DST has Daughterboard"); in dst_get_tuner_info()
1075 dprintk(verbose, DST_ERROR, 1, "Forcing [%s] to TS188", state->fw_name); in dst_get_tuner_info()
1104 dprintk(verbose, DST_INFO, 1, "Write not Acknowledged! [Reply=0x%02x]", reply); in dst_get_device_id()
1114 dprintk(verbose, DST_INFO, 1, "Checksum failure!"); in dst_get_device_id()
1126 dprintk(verbose, DST_ERROR, 1, "Recognise [%s]", p_dst_type->device_id); in dst_get_device_id()
1134 dprintk(verbose, DST_ERROR, 1, "Unsupported"); in dst_get_device_id()
1142 dprintk(verbose, DST_ERROR, 1, "Unsupported"); in dst_get_device_id()
1150 dprintk(verbose, DST_ERROR, 1, "[%s] has a [%s]", in dst_get_device_id()
1159 …dprintk(verbose, DST_ERROR, 1, "Unable to recognize %s or %s", &state->rxbuffer[0], &state->rxbuff… in dst_get_device_id()
1160 dprintk(verbose, DST_ERROR, 1, "please email linux-dvb@linuxtv.org with this type in"); in dst_get_device_id()
1177 dprintk(verbose, DST_ERROR, 1, "RDC 8820 RESET Failed."); in dst_probe()
1185 dprintk(verbose, DST_ERROR, 1, "DST Initialization Failed."); in dst_probe()
1190 dprintk(verbose, DST_ERROR, 1, "unknown device."); in dst_probe()
1194 dprintk(verbose, DST_INFO, 1, "MAC: Unsupported command"); in dst_probe()
1198 dprintk(verbose, DST_INFO, 1, "Tuner: Unsupported command"); in dst_probe()
1205 dprintk(verbose, DST_INFO, 1, "FW: Unsupported command"); in dst_probe()
1209 dprintk(verbose, DST_INFO, 1, "Card: Unsupported command"); in dst_probe()
1213 dprintk(verbose, DST_INFO, 1, "Vendor: Unsupported command"); in dst_probe()
1227 dprintk(verbose, DST_NOTICE, 1, "DST Communication Initialization Failed."); in dst_command()
1231 dprintk(verbose, DST_INFO, 1, "Trying to recover.. "); in dst_command()
1233 dprintk(verbose, DST_ERROR, 1, "Recovery Failed."); in dst_command()
1239 dprintk(verbose, DST_ERROR, 1, "PIO Disable Failed."); in dst_command()
1245 dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); in dst_command()
1247 dprintk(verbose, DST_INFO, 1, "Recovery Failed."); in dst_command()
1253 dprintk(verbose, DST_INFO, 1, "write not acknowledged 0x%02x ", reply); in dst_command()
1265 dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); in dst_command()
1267 dprintk(verbose, DST_INFO, 1, "Recovery failed."); in dst_command()
1273 dprintk(verbose, DST_INFO, 1, "checksum failure"); in dst_command()
1349 dprintk(verbose, DST_DEBUG, 1, "read not successful"); in dst_get_tuna()
1356 dprintk(verbose, DST_INFO, 1, "checksum failure ? "); in dst_get_tuna()
1361 dprintk(verbose, DST_INFO, 1, "checksum failure? "); in dst_get_tuna()
1387 dprintk(verbose, DST_INFO, 1, "type_flags 0x%x ", state->type_flags); in dst_write_tuna()
1397 dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed."); in dst_write_tuna()
1412 dprintk(verbose, DST_DEBUG, 1, "write not successful"); in dst_write_tuna()
1416 dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !"); in dst_write_tuna()
1420 dprintk(verbose, DST_DEBUG, 1, "read verify not successful."); in dst_write_tuna()
1424 dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply); in dst_write_tuna()
1622 dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency); in dst_set_frontend()
1630 dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->symbol_rate); in dst_set_frontend()
1656 dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency); in dst_tune_frontend()
1664 dprintk(verbose, DST_DEBUG, 1, "Set Symbolrate=[%d]", p->symbol_rate); in dst_tune_frontend()
1750 …dprintk(verbose, DST_ERROR, 1, "unknown DST type. please report to the LinuxTV.org DVB mailinglist… in dst_attach()