Lines Matching refs:platform

17 modes causes the PM core to skip some platform-related callbacks which on ACPI
19 to hibernate or resume in the "reboot" mode, you should try the "platform" mode:
21 # echo platform > /sys/power/disk
26 Unfortunately, the "platform" mode of hibernation does not work on some systems
36 If neither "platform" nor "shutdown" hibernation mode works, you will need to
52 platform
53 - test the freezing of processes, suspending of devices and platform
57 - test the freezing of processes, suspending of devices, platform
61 - test the freezing of processes, suspending of devices, platform global
63   platform/system devices
65 (*) the platform global control methods are only available on ACPI systems
66     and are only tested if the hibernation mode is set to "platform"
71 to use the "devices" test mode along with the "platform" mode of hibernation,
75 # echo platform > /sys/power/disk
79 resume devices and thaw processes.  If "platform" is written to
82 prepare the platform firmware for hibernation.  Next, it will wait 5 seconds and
83 invoke the platform (eg. ACPI) global methods used to cancel hibernation etc.
94 the "platform" test will fail as well and so on.  Thus, as a rule of thumb, you
95 should try the test modes starting from "freezer", through "devices", "platform"
125 If the "platform" test fails, there is a problem with the handling of the
126 platform (eg. ACPI) firmware on your system.  In that case the "platform" mode
136 If the "core" test fails, which means that suspending of the system/platform
141 A failure of any of the "platform", "processors" or "core" tests may cause your
150 "reboot", "shutdown" and "platform" modes.  If that does not work, there
184 Namely, after writing "freezer", "devices", "platform", "processors", or "core"
190 invocation of the platform firmware in order to put the system into the sleep