Lines Matching refs:standby
339 drives are offline or critical or any non-standby physical drives are dead.
378 an active part of a drive group, never on a standby drive. The command
382 make-standby <channel>:<target-id>
384 The "make-standby" command changes physical drive <channel>:<target-id>
387 standby drive. It cannot be used to add a standby drive to the controller
417 group without a standby drive, and the drive group has been configured into two
488 Since there are no standby drives configured, the system can continue to access
589 group with a standby drive, and the drive group has been configured into two
635 Since a standby drive is configured, the controller automatically begins
636 rebuilding onto the standby drive:
724 Note that the absence of a viable standby drive does not create an "ALERT"
727 new standby drive:
729 gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
734 standby drive, and the status message that results from the operation is then