Lines Matching refs:IDE
2 # IDE ATA ATAPI Block device driver configuration
5 # Select HAVE_IDE if IDE is supported
9 menuconfig IDE config
14 If you say Y here, your kernel will be able to manage ATA/(E)IDE and
15 ATAPI units. The most common cases are IDE hard drives and ATAPI
30 if IDE
32 comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
58 The IDE driver (which you are currently configuring) supports
62 this config option enables the IDE driver's SATA support.
64 supports SATA controllers, and this (IDE) driver supports
104 tristate "PCMCIA IDE support"
107 Support for Compact Flash cards, outboard IDE disks, tape drives,
111 tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
118 tristate "Include IDE/ATAPI CDROM support"
122 a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
128 along with other IDE devices, as "hdb" or "hdc", or something
137 bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT
146 tristate "Include IDE/ATAPI TAPE support"
149 If you have an IDE tape drive using the ATAPI protocol, say Y.
150 ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
159 along with other IDE devices, as "hdb" or "hdc", or something
169 bool "IDE ACPI support"
172 Implement ACPI support for generic IDE devices. On modern
176 bool "IDE Taskfile Access"
187 depends on IDE && PROC_FS
196 comment "IDE chipset support/bugfixes"
199 tristate "generic/default IDE chipset support"
203 This is the generic IDE driver. This driver attaches to the
206 kernel or loaded before other ATA (IDE or libata) drivers
211 Also, currently, IDE generic doesn't allow IRQ sharing
215 to load IDE generic driver on modern systems.
220 tristate "Platform driver for IDE interfaces"
222 This is the platform IDE driver, used mostly for Memory Mapped
223 IDE devices, like Compact Flashes running in True IDE mode.
232 The CMD-Technologies CMD640 IDE chip is used on many common 486 and
238 enables access to the secondary IDE ports in some CMD640 based
249 the "CSA-6400E PCI to IDE controller" that some people have. For
257 prefetch on CMD640 IDE interfaces. For details, read
258 <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
275 comment "PCI IDE chipsets support"
281 bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
282 depends on IDE=y && BLK_DEV_IDEPCI
285 Probe IDE PCI devices in the order in which they appear on the
287 instead of the order in which IDE PCI host drivers are loaded.
290 IDE devices is unreliable and use other means for achieving
300 Normally, IDE controllers built into the motherboard (on-board
312 IDE devices is unreliable and use other means for achieving it
318 tristate "Generic PCI IDE Chipset Support"
321 This option provides generic support for various PCI IDE Chipsets
337 The PC-Technologies RZ1000 IDE chip is used on many common 486 and
355 IDE controllers. This allows the kernel to change PIO, DMA and UDMA
373 tristate "AMD and nVidia IDE support"
384 tristate "ATI IXP chipset IDE support"
392 Say Y here if you have an ATI IXP chipset IDE controller.
399 Say Y here if you have an IDE controller which uses any of these
403 tristate "Compaq Triflex IDE support"
406 Say Y here if you have a Compaq Triflex IDE controller, such
493 This driver adds support for the on-board IDE controller on the
505 tristate "IT8172 IDE support"
508 This driver adds support for the IDE controller on the
512 tristate "IT8213 IDE support"
515 This driver adds support for the ITE 8213 IDE controller.
518 tristate "IT821X IDE support"
521 This driver adds support for the ITE 8211 IDE controller and the
522 IT 8212 IDE RAID controller in both RAID and pass-through mode.
604 If you have a Winbond SL82c105 IDE controller, say Y here to enable
626 using the Tekram TRM290 PCI IDE chip. Volunteers are
635 This driver adds explicit support for VIA BusMastering IDE chips.
646 tristate "Toshiba's Cell Reference Set IDE support"
650 This driver provides support for the on-board IDE controller on
658 tristate "PowerMac on-board IDE support"
663 This driver provides support for the on-board IDE controller on
679 bool "IDE for AMD Alchemy Au1200"
683 prompt "IDE Mode for AMD Alchemy Au1200"
688 bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
691 bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
696 tristate "TX4938 internal IDE support"
701 tristate "TX4939 internal IDE support"
706 tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
711 tristate "ICS IDE interface support"
714 On Acorn systems, say Y here if you wish to use the ICS IDE
723 the ICS IDE driver.
733 tristate "H8300 IDE support"
737 Enables the H8300 IDE driver.
740 tristate "Amiga Gayle IDE interface support"
743 This is the IDE driver for the Amiga Gayle IDE interface. It supports
744 both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
745 This includes on-board IDE interfaces on some Amiga models (A600,
746 A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
749 It also provides support for the so-called `IDE doublers' (made
751 the on-board IDE interface of some Amiga models. Using such an IDE
752 doubler, you can connect up to four instead of two IDE devices to
753 the Amiga's on-board IDE interface. The feature is enabled at kernel
756 Say Y if you have an Amiga with a Gayle IDE interface and want to use
757 IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
761 use Gayle IDE interfaces on the Zorro expansion bus.
764 tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
767 This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
772 use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
773 to one of its IDE interfaces.
776 tristate "Falcon IDE interface support"
779 This is the IDE driver for the on-board IDE interface on the Atari
780 Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
781 disks, CD-ROM drives, etc.) that are connected to the on-board IDE
785 tristate "Macintosh Quadra/Powerbook IDE interface support"
788 This is the IDE driver for the on-board IDE interface on some m68k
791 (used in the Powerbook 150 and 190 models) IDE interface.
793 Say Y if you have such an Macintosh model and want to use IDE
795 on-board IDE interface.
798 tristate "Q40/Q60 IDE interface support"
801 Enable the on-board IDE controller in the Q40/Q60. This should
806 tristate "Palmchip bk3710 IDE controller support"
811 Say Y here if you want to support the onchip IDE controller on the
817 comment "Other IDE chipsets support"
835 boot parameter. It enables support for the secondary IDE interface
847 boot parameter. It enables support for the secondary IDE interface
858 boot parameter. It enables support for the secondary IDE interface
879 boot parameter. It enables support for the secondary IDE interface
891 endif # IDE