Lines Matching refs:ISA
72 - io-irq.exe Configuration program to setup ISA boards. Please note that
111 There are two types of buses, ISA and PCI, for Smartio/Industio
114 ISA board
119 Please make sure the JP1 is open after the ISA board is set properly.
124 with other ISA devices. Please refer to hardware installation
187 This driver will activate ISA boards according to the parameter set
188 in the driver. After all specified ISA board activated, PCI board
190 Therefore the board number is sorted by the CAP address of ISA boards.
191 For PCI boards, their sequence will be after ISA boards and C168H/PCI
254 if "mxser" is activated. If the MOXA board is ISA board, the
268 But if you use ISA board, please modify the "modprobe ..." command
287 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system,
294 | | | +- 4th ISA board
295 | | +------ 3rd ISA board
296 | +------------ 2nd ISA board
297 +------------------- 1st ISA board
316 3.5.3 Add CAP address list for ISA boards. For PCI boards user,
319 In module mode, the CAP address for ISA board is given by
322 install any ISA boards, you may skip to next portion.
333 example, to driver 2 ISA boards with CAP address
495 Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
504 Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx).
506 Moxa ISA board needs an interrupt vector.Please refer to user's manual