Lines Matching refs:IDE
2 The Amiga Buddha and Catweasel IDE Driver (part of ide.c) was written by
7 Register map of the Buddha IDE controller and the
44 $800-$8ff IDE-Select 0 (Port 0, Register set 0)
46 $900-$9ff IDE-Select 1 (Port 0, Register set 1)
48 $a00-$aff IDE-Select 2 (Port 1, Register set 0)
50 $b00-$bff IDE-Select 3 (Port 1, Register set 1)
52 $c00-$cff IDE-Select 4 (Port 2, Register set 0,
55 $d00-$dff IDE-Select 5 (Port 3, Register set 1,
63 level of the IRQ-line of IDE port 0.
68 level of the IRQ-line of IDE port 1.
73 level of the IRQ-line of IDE port 2.
80 IDE ports to the Zorro bus. This mechanism
98 The IDE ports issue an INT2. You can read the level of the
99 IRQ-lines of the IDE-ports by reading from the three (two
107 The IDE ports are fed by the address lines A2 to A4, just as
108 the Amiga 1200 and Amiga 4000 IDE ports are. This way
110 polls two words out of the same address of IDE port since
116 If you're using the mirrored registers of the IDE-ports with
143 (same timing as the Amiga 1200 does on it's IDE port without
174 When accessing IDE registers with A6=1 (for example $84x),
202 connected to the third IDE-port. The IRQ-register $f80
204 the third IDE port are going into data's Nirwana on the