Lines Matching refs:IDE

2 	Information regarding the Enhanced IDE drive in Linux 2.6
7    The hdparm utility can be used to control various IDE features on a
13 ***  IMPORTANT NOTICES:  BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
40 - 40-conductor IDE cables are capable of transferring data in DMA modes up to
54 This is the multiple IDE interface driver, as evolved from hd.c.
56 It supports up to 9 IDE interfaces per default, on one or more IRQs (usually
70 This driver automatically probes for most IDE interfaces (including all PCI
76 The IDE driver automatically detects and handles this.  However, this may
106 Note that when only one IDE device is attached to an interface, it should be
125 interface (/dev/hda) and an IDE cdrom drive on the secondary interface
142   - Your IDE controller requires some nonstandard initialization sequence
144     be a separate MS-DOS driver just for the controller.  IDE interfaces
163 The IDE driver is modularized.  The high level disk/CD-ROM/tape/floppy
184 For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672)
198 (support for IDE generic chipset with four drives on one port).
200 To enable support for IDE doublers on Amiga use "doubler" kernel parameter
207 * "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
211   if IDE is compiled as module
233 IDE = Integrated Drive Electronics, meaning that each drive has a built-in
234 controller, which is why an "IDE interface card" is not a "controller card".
238 name for "IDE".
241 which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations.