Lines Matching refs:see

18 this driver will not work with drives like that either (but see the
71    can see if a filesystem is known to the kernel by catting
87    in the third position; see Documentation/ide/ide.txt.)
99 4. Boot the system.  If the drive is recognized, you should see a
104    If you do not see this, see section 5 below.
114 6. You should be able to see any error messages from the driver with
128 an empty directory.  You should now be able to see the contents of the
193      see a boot message like
212      see Documentation/ide/ide.txt.
228     means that the system did not see an interrupt from the drive when
276   - If you get errors from mount, it may help to check `dmesg' to see
287     If you see a dump, then the drive and driver are probably working
291   - If you see `not a block device' errors, check that the definitions
327     If you see this in kernels later than 1.3.0, please report it as a