Lines Matching refs:INFO_LEAD
1133 #define INFO_LEAD KERN_INFO "(scsi%d:%d:%d:%d) " macro
2241 printk(INFO_LEAD "Synchronous at %s Mbyte/sec, " in aic7xxx_set_syncrate()
2247 printk(INFO_LEAD "Using asynchronous transfers.\n", in aic7xxx_set_syncrate()
2310 printk(INFO_LEAD "Using %s transfers\n", p->host_no, channel, target, in aic7xxx_set_width()
2690 printk(INFO_LEAD "Allocating initial %ld SCB structures.\n", in aic7xxx_allocate_scb()
2693 printk(INFO_LEAD "Allocating %ld additional SCB structures.\n", in aic7xxx_allocate_scb()
2951 printk(INFO_LEAD "Device failed to complete Wide Negotiation " in aic7xxx_done()
2953 printk(INFO_LEAD "returned a sense error code for invalid message, " in aic7xxx_done()
2955 printk(INFO_LEAD "Wide negotiation to this device.\n", p->host_no, in aic7xxx_done()
2969 printk(INFO_LEAD "Device failed to complete Sync Negotiation " in aic7xxx_done()
2971 printk(INFO_LEAD "returned a sense error code for invalid message, " in aic7xxx_done()
2973 printk(INFO_LEAD "Sync negotiation to this device.\n", p->host_no, in aic7xxx_done()
2988 printk(INFO_LEAD "Device failed to complete Parallel Protocol " in aic7xxx_done()
2990 printk(INFO_LEAD "returned a sense error code for invalid message, " in aic7xxx_done()
2992 printk(INFO_LEAD "Parallel Protocol Request negotiation to this " in aic7xxx_done()
3030 printk(INFO_LEAD "Moving SCB from delayed to waiting queue.\n", in aic7xxx_done()
3158 printk(INFO_LEAD "Aborting scb %d\n", in aic7xxx_run_done_queue()
3174 printk(INFO_LEAD "%d commands found and queued for " in aic7xxx_run_done_queue()
3382 printk(INFO_LEAD "Reset device, active_scb %d\n", in aic7xxx_reset_device()
3384 printk(INFO_LEAD "Current scb_tag %d, SEQADDR 0x%x, LASTPHASE " in aic7xxx_reset_device()
3389 printk(INFO_LEAD "SG_CACHEPTR 0x%x, SG_COUNT %d, SCSISIGI 0x%x\n", in aic7xxx_reset_device()
3393 printk(INFO_LEAD "SSTAT0 0x%x, SSTAT1 0x%x, SSTAT2 0x%x\n", in aic7xxx_reset_device()
3438 printk(INFO_LEAD "Cleaning up status information " in aic7xxx_reset_device()
3506 printk(INFO_LEAD "Cleaning QINFIFO.\n", p->host_no, channel, target, lun ); in aic7xxx_reset_device()
3515 printk(INFO_LEAD "Cleaning waiting_scbs.\n", p->host_no, channel, in aic7xxx_reset_device()
3562 printk(INFO_LEAD "Cleaning waiting for selection " in aic7xxx_reset_device()
3631 printk(INFO_LEAD "Cleaning disconnected scbs " in aic7xxx_reset_device()
3871 printk(INFO_LEAD "Reset channel called, %s initiate reset.\n", in aic7xxx_reset_channel()
3937 printk(INFO_LEAD "Stealthily resetting idle channel.\n", p->host_no, in aic7xxx_reset_channel()
3958 printk(INFO_LEAD "Resetting currently active channel.\n", p->host_no, in aic7xxx_reset_channel()
3973 printk(INFO_LEAD "Channel reset\n", p->host_no, channel, -1, -1); in aic7xxx_reset_channel()
4155 printk(INFO_LEAD "timer: Yikes, loop in delayed_scbs list.\n", in aic7xxx_timer()
4295 printk(INFO_LEAD "Underflow - Wanted %u, %s %u, residual SG " in aic7xxx_calculate_residual()
4299 printk(INFO_LEAD "status 0x%x.\n", p->host_no, CTL_OF_SCB(scb), in aic7xxx_calculate_residual()
4355 printk(INFO_LEAD "Bus Device Reset delivered.\n", p->host_no, channel, in aic7xxx_handle_device_reset()
4410 printk(INFO_LEAD "Rejecting unknown message (0x%x) received from " in aic7xxx_handle_seqint()
4426 printk(INFO_LEAD "Target did not send an IDENTIFY message; " in aic7xxx_handle_seqint()
4440 printk(INFO_LEAD "Missed busfree.\n", p->host_no, channel, in aic7xxx_handle_seqint()
4447 printk(INFO_LEAD "Unknown scsi bus phase, continuing\n", p->host_no, in aic7xxx_handle_seqint()
4460 printk(INFO_LEAD "Enabling REQINITs for MSG_IN\n", p->host_no, in aic7xxx_handle_seqint()
4571 printk(INFO_LEAD "Device is refusing tagged commands, using " in aic7xxx_handle_seqint()
4598 printk(INFO_LEAD "Device is rejecting PPR messages, falling " in aic7xxx_handle_seqint()
4638 printk(INFO_LEAD "Device is rejecting WDTR messages, using " in aic7xxx_handle_seqint()
4655 printk(INFO_LEAD "Device is rejecting SDTR messages, using " in aic7xxx_handle_seqint()
4664 printk(INFO_LEAD "Received MESSAGE_REJECT for unknown cause. " in aic7xxx_handle_seqint()
4715 printk(INFO_LEAD "Interrupted for status of GOOD???\n", in aic7xxx_handle_seqint()
4771 printk(INFO_LEAD "Requesting SENSE with %s\n", p->host_no, in aic7xxx_handle_seqint()
4775 printk(INFO_LEAD "Requesting SENSE, no MSG\n", p->host_no, in aic7xxx_handle_seqint()
4784 printk(INFO_LEAD "CHECK_CONDITION on REQUEST_SENSE, returning " in aic7xxx_handle_seqint()
4912 printk(INFO_LEAD "Queue full received; queue depth %d, " in aic7xxx_handle_seqint()
4917 printk(INFO_LEAD "Target busy\n", p->host_no, CTL_OF_SCB(scb)); in aic7xxx_handle_seqint()
4938 printk(INFO_LEAD "Queue depth reduced to %d\n", p->host_no, in aic7xxx_handle_seqint()
4951 printk(INFO_LEAD "QUEUE_FULL status received with 0 " in aic7xxx_handle_seqint()
4953 printk(INFO_LEAD "Tagged Command Queueing disabled\n", in aic7xxx_handle_seqint()
4973 printk(INFO_LEAD "Unexpected target status 0x%x.\n", p->host_no, in aic7xxx_handle_seqint()
5013 printk(INFO_LEAD "Bus device reset mailed.\n", in aic7xxx_handle_seqint()
5028 printk(INFO_LEAD "Abort message mailed.\n", p->host_no, in aic7xxx_handle_seqint()
5035 printk(INFO_LEAD "Sending PPR (%d/%d/%d/%d) message.\n", in aic7xxx_handle_seqint()
5048 printk(INFO_LEAD "Sending WDTR message.\n", p->host_no, in aic7xxx_handle_seqint()
5085 printk(INFO_LEAD "Sending SDTR %d/%d message.\n", p->host_no, in aic7xxx_handle_seqint()
5163 printk(INFO_LEAD "Data Overrun during SEND_SENSE operation.\n", in aic7xxx_handle_seqint()
5194 printk(INFO_LEAD "Got WIDE_RESIDUE message, patching up data " in aic7xxx_handle_seqint()
5315 printk(INFO_LEAD "SCSISIGI 0x%x, SEQADDR 0x%x, SSTAT0 0x%x, SSTAT1 " in aic7xxx_handle_seqint()
5320 printk(INFO_LEAD "SG_CACHEPTR 0x%x, SSTAT2 0x%x, STCNT 0x%x\n", in aic7xxx_handle_seqint()
5335 printk(INFO_LEAD "SCSISIGI 0x%x, SEQADDR 0x%x, SSTAT0 0x%x, SSTAT1 " in aic7xxx_handle_seqint()
5340 printk(INFO_LEAD "SG_CACHEPTR 0x%x, SSTAT2 0x%x, STCNT 0x%x\n", in aic7xxx_handle_seqint()
5347 printk(INFO_LEAD "Fixing up SG address for sequencer.\n", p->host_no, in aic7xxx_handle_seqint()
5382 printk(INFO_LEAD "Tracepoint #2 reached.\n", p->host_no, in aic7xxx_handle_seqint()
5571 printk(INFO_LEAD "Received pre-emptive SDTR message from " in aic7xxx_parse_msg()
5659 printk(INFO_LEAD "Requesting %d bit transfers, rejecting.\n", in aic7xxx_parse_msg()
5740 printk(INFO_LEAD "Received pre-emptive WDTR message from " in aic7xxx_parse_msg()
5820 printk(INFO_LEAD "Parsing PPR message (%d/%d/%d/%d)\n", in aic7xxx_parse_msg()
5905 printk(INFO_LEAD "Received pre-emptive PPR message from " in aic7xxx_parse_msg()
5928 printk(INFO_LEAD "Requesting %d bit transfers, rejecting.\n", in aic7xxx_parse_msg()
6082 printk(INFO_LEAD "Completed sending of REQINIT message.\n", in aic7xxx_handle_reqinit()
6091 printk(INFO_LEAD "PHASEMIS while sending REQINIT message.\n", in aic7xxx_handle_reqinit()
6131 printk(INFO_LEAD "PHASEMIS while receiving REQINIT message.\n", in aic7xxx_handle_reqinit()
6134 printk(INFO_LEAD "Completed receipt of REQINIT message.\n", in aic7xxx_handle_reqinit()
6238 printk(INFO_LEAD "SCB %d abort delivered.\n", p->host_no, in aic7xxx_handle_scsiint()
6289 printk(INFO_LEAD "Unexpected busfree, LASTPHASE = 0x%x, " in aic7xxx_handle_scsiint()
6321 printk(INFO_LEAD "Invalid WAITING_SCBH value %d, improvising.\n", in aic7xxx_handle_scsiint()
6379 printk(INFO_LEAD "Selection Timeout.\n", p->host_no, CTL_OF_SCB(scb)); in aic7xxx_handle_scsiint()
6535 printk(INFO_LEAD "parity error during PPR message, reverting " in aic7xxx_handle_scsiint()
6576 printk(INFO_LEAD "Handling REQINIT, SSTAT1=0x%x.\n", p->host_no, in aic7xxx_handle_scsiint()
6589 printk(INFO_LEAD "Unknown SCSIINT status, SSTAT1(0x%x).\n", in aic7xxx_handle_scsiint()
6760 printk(INFO_LEAD "Command Complete Int.\n", p->host_no, -1, -1, -1); in aic7xxx_handle_command_completion_intr()
7075 printk(INFO_LEAD "Disconnection disabled, unable to " in aic7xxx_device_queue_depth()
7116 printk(INFO_LEAD "Enabled tagged queuing, queue depth %d.\n", in aic7xxx_device_queue_depth()
8772 printk(INFO_LEAD "spurious interrupt during configuration, cleared.\n", in aic7xxx_register()
10846 printk(INFO_LEAD "Scanning channel for devices.\n", in aic7xxx_queue()
10855 printk(INFO_LEAD "Scanning channel for devices.\n", in aic7xxx_queue()
10962 printk(INFO_LEAD "Bus Device reset, scb flags 0x%x, ", in aic7xxx_bus_device_reset()
10991 printk(INFO_LEAD "SCSISIGI 0x%x, SEQADDR 0x%x, SSTAT0 0x%x, SSTAT1 " in aic7xxx_bus_device_reset()
10996 printk(INFO_LEAD "SG_CACHEPTR 0x%x, SSTAT2 0x%x, STCNT 0x%x\n", p->host_no, in aic7xxx_bus_device_reset()
11035 printk(INFO_LEAD "Device reset message in " in aic7xxx_bus_device_reset()
11110 printk(INFO_LEAD "Queueing device reset " in aic7xxx_bus_device_reset()
11207 printk(INFO_LEAD "Abort called with bogus Scsi_Cmnd " in aic7xxx_abort()
11225 printk(INFO_LEAD "Abort called for already completed" in aic7xxx_abort()
11260 printk(INFO_LEAD "SCB aborted once already, " in aic7xxx_abort()
11271 printk(INFO_LEAD "Reset/Abort pending for this " in aic7xxx_abort()
11282 printk(INFO_LEAD "Aborting scb %d, flags 0x%x, SEQADDR 0x%x, LASTPHASE " in aic7xxx_abort()
11287 printk(INFO_LEAD "SG_CACHEPTR 0x%x, SG_COUNT %d, SCSISIGI 0x%x\n", in aic7xxx_abort()
11291 printk(INFO_LEAD "SSTAT0 0x%x, SSTAT1 0x%x, SSTAT2 0x%x\n", in aic7xxx_abort()
11320 printk(INFO_LEAD "SCB is currently active. " in aic7xxx_abort()
11322 printk(INFO_LEAD "SCSISIGI 0x%x, SEQADDR 0x%x, SSTAT0 0x%x, SSTAT1 " in aic7xxx_abort()
11327 printk(INFO_LEAD "SG_CACHEPTR 0x%x, SSTAT2 0x%x, STCNT 0x%x\n", in aic7xxx_abort()
11349 printk(INFO_LEAD "SCB found on waiting list and " in aic7xxx_abort()
11370 printk(INFO_LEAD "SCB found in QINFIFO and " in aic7xxx_abort()
11391 printk(INFO_LEAD "SCB found on hardware waiting" in aic7xxx_abort()
11447 printk(INFO_LEAD "SCB disconnected. Queueing Abort" in aic7xxx_abort()
11537 printk(INFO_LEAD "Reset called for a SYNCHRONOUS reset, flags 0x%x, " in aic7xxx_reset()
11546 printk(INFO_LEAD "Reset called with bogus Scsi_Cmnd" in aic7xxx_reset()
11557 printk(INFO_LEAD "Reset called, scb %d, flags " in aic7xxx_reset()
11596 printk(INFO_LEAD "Bus device reset already sent to " in aic7xxx_reset()
11605 printk(INFO_LEAD "Have already attempted to reach " in aic7xxx_reset()
11607 printk(INFO_LEAD "message, will escalate to bus " in aic7xxx_reset()
11616 printk(INFO_LEAD "Bus device reset stupid when " in aic7xxx_reset()
11629 printk(INFO_LEAD "Reset called too soon after last " in aic7xxx_reset()
11631 printk(INFO_LEAD "bus or host reset, escalating.\n", p->host_no, in aic7xxx_reset()
11640 printk(INFO_LEAD "Reset called too soon after " in aic7xxx_reset()