Lines Matching refs:ncr53c8xx
61 11. Some constants and flags of the ncr53c8xx.h header file
88 The initial Linux ncr53c8xx driver has been a port of the ncr driver from
98 - ncr53c8xx generic driver that supports all the SYM53C8XX family including
265 generic ncr53c8xx driver supports up to 64, but using more than 32 is
275 ncr53c8xx=tags:4/t2t3q15-t4q7/t1u0q32
303 1st method: boot your system using 'ncr53c8xx=verb:0' option.
325 /proc/scsi/ncr53c8xx/N (N=0,1,2 ....)
328 /proc/scsi/ncr53c8xx/0
335 cat /proc/scsi/ncr53c8xx/0
438 echo "<verb> <parameters>" >/proc/scsi/ncr53c8xx/0
632 A boot setup command for the ncr53c8xx (sym53c8xx) driver begins with the
633 driver name "ncr53c8xx="(sym53c8xx). The kernel syntax parser then expects
638 lilo: linux root=/dev/hda2 ncr53c8xx=tags:4,sync:10,debug:0x200
649 insmod ncr53c8xx.o ncr53c8xx="tags:4 sync:10 debug:0x200"
663 insmod ncr53c8xx
666 address 0x1400 and then installs the ncr53c8xx driver to the adapter at IO
709 ncr53c8xx=tags:10/t2t3q16-t5q24/t1u2q32
838 For example 'ncr53c8xx=excl:0xb400,excl:0xc000' indicate to the
839 ncr53c8xx driver not to attach hosts at address 0xb400 and 0xc000.
891 ncr53c8xx=mpar:y,spar:y,disc:y,specf:3,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
897 ncr53c8xx=safe:y,mpar:y,disc:y
898 ncr53c8xx=safe:y,disc:y
899 ncr53c8xx=safe:y,mpar:y
900 ncr53c8xx=safe:y
904 ncr53c8xx=mpar:y,spar:y,disc:y,specf:1,fsn:n,ultra:2,fsn:n,revprob:n,verb:1\
908 "ncr53c8xx=verb:2" to get the "static" setup of the driver, or add "verb:2"
993 The ncr53c8xx always tries to attach all the controllers. Option 0x80 has
994 not been added to the ncr53c8xx driver, since it has been reported to
996 controller not to be attached by the ncr53c8xx driver at Linux boot, you
1053 11. Some constants and flags of the ncr53c8xx.h header file
1068 ncr53c8xx=specf:n
1147 README.ncr53c8xx : this file
1148 ChangeLog.ncr53c8xx : change log
1149 ncr53c8xx.h : definitions
1150 ncr53c8xx.c : the driver code
1192 line: ncr53c8xx=revprob:y
1248 By default, the ncr53c8xx and sym53c8xx drivers request IRQs with both the
1255 ncr53c8xx=irqm:0x20 (for the generic ncr53c8xx driver)
1300 - echo "setsync all 25" >/proc/scsi/ncr53c8xx/0
1303 - echo "setflag 3" >/proc/scsi/ncr53c8xx/0
1307 - echo "settags 3 8" >/proc/scsi/ncr53c8xx/0