Lines Matching refs:SCSI
5 The AIC7xxx SCSI driver adds support for Adaptec (http://www.adaptec.com)
6 SCSI controllers and chipsets. Major portions of the driver and driver
22 chipsets. In general, this means *all* of the Adaptec SCSI controllers
37 W - Wide SCSI, SCSI-3, 16bit bus, 68pin connector, will also support
38 SCSI-1/SCSI-2 50pin devices, transfer rates up to 20MB/s.
39 U - Ultra SCSI, transfer rates up to 40MB/s.
40 U2- Ultra 2 SCSI, transfer rates up to 80MB/s.
41 U3- Ultra 3 SCSI, transfer rates up to 160MB/s.
42 D - Differential SCSI.
43 T - Twin Channel SCSI. Up to 14 SCSI devices.
45 AHA-274x - EISA SCSI controller
46 AHA-284x - VLB SCSI controller
47 AHA-29xx - PCI SCSI controller
48 AHA-39xx - PCI controllers with multiple separate SCSI channels on-board.
70 a totally separate beast from the bare SCSI controllers and this driver
113 "aic7xxx=no_reset" - Eliminate the SCSI bus reset during startup.
114 Some SCSI devices need the initial reset that this option disables
180 The original SCSI spec says that this "should be" 256ms. This
182 very old SCSI I devices need the full 256ms. Most modern devices
215 termination on your SCSI controllers to a particular setting. This
216 is a bit mask variable that applies for up to 8 aic7xxx SCSI channels.
261 need to use this option. However, if you are having lots of SCSI
267 While it's down, unplug all SCSI cables from your Adaptec SCSI
268 controller. Boot the system back up to the Adaptec EZ-SCSI BIOS
281 back up the SCSI cables, and boot back into your machine like normal.
287 to be the same order as the SCSI controllers are registered. The
288 above option and this option both work on the order of the SCSI
301 you unplug all the SCSI cables, get the starting DEVCONFIG value.
425 directory. That directory contains a file for each SCSI controller in
429 Thanks to Michael Neuffer for his upper-level SCSI help, and
440 the driver to panic the kernel on the first SCSI abort issued by the
441 mid level SCSI code. If your system is going to reset loops and you