Lines Matching refs:Host
26 This driver supports all present BusLogic MultiMaster Host Adapters, and should
28 recently, BusLogic introduced the FlashPoint Host Adapters, which are less
30 Despite not having an onboard CPU, the FlashPoint Host Adapters perform very
35 analogous to the firmware on the MultiMaster Host Adapters. Thanks to their
36 having provided the SCCB Manager, this driver now supports the FlashPoint Host
40 to achieve the full performance that BusLogic SCSI Host Adapters and modern
48 The latest information on Linux support for BusLogic SCSI Host Adapters, as
62 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
63 Ultra SCSI Host Adapter in January 1996. This was mutually beneficial since
139 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
199 On systems that support shared interrupts, any number of BusLogic Host
205 The following list comprises the supported BusLogic SCSI Host Adapters as of
207 Host Adapter not in the following table contact the author beforehand to verify
210 FlashPoint Series PCI Host Adapters:
222 MultiMaster "W" Series Host Adapters:
228 MultiMaster "C" Series Host Adapters:
240 MultiMaster "S" Series Host Adapters:
252 MultiMaster "A" Series Host Adapters:
257 AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
260 BusLogic SCSI Host Adapters are available packaged both as bare boards and as
271 FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software
282 FlashPoint Host Adapters ship with their configuration set to "Factory
296 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
304 that previous BusLogic SCSI Host Adapters respond to. This driver supports
321 In systems with multiple BusLogic PCI Host Adapters, the order in which the
376 MultiMaster Host Adapter. If neither "IO:" nor "NoProbeISA" options are
384 The "NoProbe" option disables all probing and therefore no BusLogic Host
390 Addresses and therefore only PCI MultiMaster and FlashPoint Host Adapters
396 Space and therefore only ISA Multimaster Host Adapters will be detected, as
397 well as PCI Multimaster Host Adapters that have their ISA Compatible I/O
402 The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
408 The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed
409 before FlashPoint Host Adapters. By default, if both FlashPoint and PCI
410 MultiMaster Host Adapters are present, this driver will probe for
411 FlashPoint Host Adapters first unless the BIOS primary disk is controlled
412 by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host
417 The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed
418 before MultiMaster Host Adapters.
424 presented for execution (either to the Host Adapter or Target Device). Note
436 on the Host Adapter's Total Queue Depth and the number, type, speed, and
437 capabilities of the detected Target Devices. For Host Adapters that
455 based on the firmware version of the BusLogic Host Adapter and based on
461 all Target Devices on this Host Adapter, overriding any limitation that
462 would otherwise be imposed based on the Host Adapter firmware version.
467 for all Target Devices on this Host Adapter.
493 The "ErrorRecovery:HardReset" or "ER:HardReset" option will initiate a Host
527 seconds. The Bus Settle Time is the amount of time to wait between a Host
534 Target Devices or Inquire Installed Devices command on MultiMaster Host
542 The "TraceProbe" option enables tracing of Host Adapter Probing.
546 The "TraceHardwareReset" option enables tracing of Host Adapter Hardware
551 The "TraceConfiguration" option enables tracing of Host Adapter
611 for BusLogic SCSI Host Adapters. To join the mailing list, send a message to