Lines Matching refs:PRINT_WARN
530 PRINT_WARN("IP takeover is not enabled on %s! " \ in qeth_add_ipato_entry()
914 PRINT_WARN("check on irq x%x, dstat=x%x, cstat=x%x, " \ in qeth_get_cards_problem()
922 PRINT_WARN("received an IDX TERMINATE on irq 0x%X/0x%X " \ in qeth_get_cards_problem()
937 PRINT_WARN("Link failure on %s (CHPID 0x%X) -- " \ in qeth_get_cards_problem()
966 PRINT_WARN("probably a problem on %s: received data is " \ in qeth_get_cards_problem()
1014 PRINT_WARN("read handler on irq x%x, read: do_IO " \ in qeth_issue_next_read()
1273 PRINT_WARN("qeth_queue_input_buffer's " \ in qeth_queue_input_buffer()
1295 PRINT_WARN("qeth_queue_input_buffer's " \ in qeth_queue_input_buffer()
1349 PRINT_WARN("irq 0x%x: error in interpreting buffer (data " \ in qeth_get_next_skb()
1365 PRINT_WARN("irq 0x%x: bad element length in element %i: " \ in qeth_get_next_skb()
1418 PRINT_WARN("irq 0x%x: inb. buffer with more headers " \ in qeth_get_next_skb()
1456 PRINT_WARN("irq 0x%x: unexpected end of buffer, " \ in qeth_get_next_skb()
1506 PRINT_WARN("no memory for packet from %s\n",card->dev_name); in qeth_get_next_skb()
1566 PRINT_WARN("on irq 0x%x: incoming SBALF 15 on buffer " \ in qeth_read_in_buffer()
1628 PRINT_WARN("adapter is using an " \ in qeth_read_in_buffer()
1778 PRINT_WARN("%s: dropped packet, no buffers " \ in qeth_read_in_buffer()
2079 PRINT_WARN("Outbound do_QDIO returned %i " \ in qeth_flush_packed_packets()
2117 PRINT_WARN("siga returned cc 1! cc=0x%x, " \ in qeth_determine_send_error()
2227 PRINT_WARN("oops... wrong send_state on %s. " \ in qeth_free_buffer()
2329 PRINT_WARN("%s: not enough headroom in skb. " \ in qeth_send_packet_fast()
2346 PRINT_WARN("%s: could not realloc headroom\n", in qeth_send_packet_fast()
2427 PRINT_WARN("%s: not enough headroom in skb. " \ in qeth_send_packet_packed()
2444 PRINT_WARN("%s: could not realloc headroom\n", in qeth_send_packet_packed()
3025 PRINT_WARN("qeth_send_control_data: do_IO " \ in qeth_send_control_data()
3815 PRINT_WARN("trying again...\n"); in qeth_send_setip()
3872 PRINT_WARN("trying again...\n"); in qeth_send_setipm()
4809 PRINT_WARN("No memory for IP address " \ in qeth_takeover_ip_ipms6()
4853 PRINT_WARN("No memory for IP address " \ in qeth_takeover_ip_ipms6()
4888 PRINT_WARN("No memory for IPM address " \ in qeth_takeover_ip_ipms6()
4943 PRINT_WARN("No memory for IPM address " \ in qeth_takeover_ip_ipms6()
5061 PRINT_WARN("No memory for IP address " \ in qeth_takeover_ip_ipms()
5105 PRINT_WARN("No memory for IP address " \ in qeth_takeover_ip_ipms()
5148 PRINT_WARN("No memory for IPM address " \ in qeth_takeover_ip_ipms()
5190 PRINT_WARN("No memory for IPM address " \ in qeth_takeover_ip_ipms()
5256 PRINT_WARN("couldn't get a unique id from the card on irq " \ in qeth_get_unique_id()
5326 PRINT_WARN("couldn't set adapter parameters on irq 0x%x: " \ in qeth_do_setadapterparms_stuff()
5347 PRINT_WARN("couldn't get MAC address on " \ in qeth_do_setadapterparms_stuff()
5370 PRINT_WARN("couldn't set broadcast mode on " \ in qeth_do_setadapterparms_stuff()
5378 PRINT_WARN("set adapter parameters not available " \ in qeth_do_setadapterparms_stuff()
5390 PRINT_WARN("couldn't set macaddr mode on " \ in qeth_do_setadapterparms_stuff()
5398 PRINT_WARN("set adapter parameters not available " \ in qeth_do_setadapterparms_stuff()
5446 PRINT_WARN("couldn't send STARTLAN on %s " \ in qeth_softsetup_card()
5476 PRINT_WARN("oops... ARP processing not supported " \ in qeth_softsetup_card()
5484 PRINT_WARN("Could not start ARP processing " \ in qeth_softsetup_card()
5501 PRINT_WARN("Could not start IP fragmenting " \ in qeth_softsetup_card()
5516 PRINT_WARN("Could not start " \ in qeth_softsetup_card()
5532 PRINT_WARN("VLAN not supported on %s\n", in qeth_softsetup_card()
5540 PRINT_WARN("Could not start vlan " in qeth_softsetup_card()
5557 PRINT_WARN("multicasting not supported on %s\n", in qeth_softsetup_card()
5565 PRINT_WARN("Could not start multicast " in qeth_softsetup_card()
5578 PRINT_WARN("IPv6 not supported on %s\n", in qeth_softsetup_card()
5601 PRINT_WARN("couldn't send QIPASSIST6 on %s: " \ in qeth_softsetup_card()
5617 PRINT_WARN("Could not enable IPv4&6 assist " \ in qeth_softsetup_card()
5629 PRINT_WARN("Could not start IPv6 assist " \ in qeth_softsetup_card()
5641 PRINT_WARN("Could not enable passthrough " \ in qeth_softsetup_card()
5654 PRINT_WARN("Broadcasting not supported on %s\n", in qeth_softsetup_card()
5661 PRINT_WARN("Could not enable broadcast " \ in qeth_softsetup_card()
5672 PRINT_WARN("Could not set up broadcast " \ in qeth_softsetup_card()
5698 PRINT_WARN("Inbound HW checksumming not " \ in qeth_softsetup_card()
5710 PRINT_WARN("Could not start inbound " \ in qeth_softsetup_card()
5727 PRINT_WARN("Could not enable inbound " \ in qeth_softsetup_card()
5756 PRINT_WARN("couldn't set up v4 routing type " \ in qeth_softsetup_card()
5773 PRINT_WARN("couldn't set up v4 routing type " \ in qeth_softsetup_card()
5818 PRINT_WARN("couldn't set up v6 routing type " \ in qeth_softsetup_card()
5835 PRINT_WARN("couldn't set up v6 routing type " \ in qeth_softsetup_card()
5875 PRINT_WARN("couldn't set up IPs on %s: 0x%x\n", in qeth_softsetup_card()
5885 PRINT_WARN("couldn't set up multicast IPs on %s: 0x%x\n", in qeth_softsetup_card()
5992 PRINT_WARN("recovery was scheduled on irq 0x%x (%s) with " \ in qeth_recover()
6003 PRINT_WARN("You are lucky! Somebody either fixed the " \ in qeth_recover()
6053 PRINT_WARN("recovery requested to be scheduled " \ in qeth_schedule_recovery()
6083 PRINT_WARN("activate queues on irq 0x%x: " \ in qeth_qdio_input_handler()
6166 PRINT_WARN("activate queues on irq 0x%x: " \ in qeth_qdio_output_handler()
6344 PRINT_WARN("sense data available on read channel.\n"); in qeth_interrupt_handler_read()
6355 PRINT_WARN("got nonzero-nonpci channel status in read_" \ in qeth_interrupt_handler_read()
6368 PRINT_WARN("unit check/exception in read_handler " \ in qeth_interrupt_handler_read()
6383 PRINT_WARN("didn't get device end in read_handler " \ in qeth_interrupt_handler_read()
6467 PRINT_WARN("sense data available on write channel.\n"); in qeth_interrupt_handler_write()
6478 PRINT_WARN("got nonzero channel status in write_handler " \ in qeth_interrupt_handler_write()
6491 PRINT_WARN("unit check/exception in write_handler " \ in qeth_interrupt_handler_write()
6509 PRINT_WARN("didn't get device end in write_handler " \ in qeth_interrupt_handler_write()
6577 PRINT_WARN("sense data available on qdio channel.\n"); in qeth_interrupt_handler_qdio()
6600 PRINT_WARN("got nonzero channel status in qdio_handler " \ in qeth_interrupt_handler_qdio()
6606 PRINT_WARN("got the following dstat on the qdio channel: " \ in qeth_interrupt_handler_qdio()
6823 PRINT_WARN("qeth_remove_card_from_list call with no card!\n"); in qeth_remove_card_from_list()
6833 PRINT_WARN("qeth_remove_card_from_list called on " \ in qeth_remove_card_from_list()
7070 PRINT_WARN("qeth_idx_activate_read (write): do_IO returned " \ in qeth_idx_activate_read()
7107 PRINT_WARN("qeth_idx_activate_read (read): do_IO " \ in qeth_idx_activate_read()
7154 PRINT_WARN("IDX_ACTIVATE on read channel irq 0x%x: " \ in qeth_idx_activate_read()
7220 PRINT_WARN("qeth_idx_activate_write (write): do_IO " \ in qeth_idx_activate_write()
7263 PRINT_WARN("qeth_idx_activate_write (read): do_IO returned " \ in qeth_idx_activate_write()
7302 PRINT_WARN("IDX_ACTIVATE on write channel irq 0x%x: " \ in qeth_idx_activate_write()
7687 PRINT_WARN("routing not applicable, reset " \ in qeth_correct_routing_status()
7709 PRINT_WARN("routing not applicable, reset " \ in qeth_correct_routing_status()
8025 PRINT_WARN("qeth_send_nops on irq 0x%x: do_IO returned %i, " \ in qeth_send_nops()
8370 PRINT_WARN("couldn't send QIPASSIST4 on %s: " \ in qeth_hardsetup_card()
9478 PRINT_WARN("Device is busy!\n"); in qeth_attach_handler()
9481 PRINT_WARN("Device became not operational.\n"); in qeth_attach_handler()
9491 PRINT_WARN("Timeout on initializing the card.\n"); in qeth_attach_handler()
9603 PRINT_WARN("soft-setup of card failed!\n"); in qeth_chandev_init_netdev()
9904 PRINT_WARN("No memory available for data\n"); in qeth_procfile_open()
9923 PRINT_WARN("No memory available for data\n"); in qeth_procfile_open()
10158 PRINT_WARN("paramter missing on procfile input, " \
10164 PRINT_WARN("paramter invalid on procfile input, " \
10473 PRINT_WARN("unknown command input in procfile\n"); in qeth_procfile_write()
10565 PRINT_WARN("No memory available for data\n"); in qeth_ipato_procfile_open()
10597 PRINT_WARN("No memory available for data\n"); in qeth_ipato_procfile_open()
10963 PRINT_WARN("was not able to register proc-file (%i).\n", in qeth_add_procfs_entries()
10973 PRINT_WARN("was not able to register ipato-proc-file (%i).\n", in qeth_add_procfs_entries()
10985 PRINT_WARN("was not able to register perf. proc-file (%i).\n", in qeth_add_procfs_entries()