286 	printk(KERN_INFO "%s v%u.%u %s\n",  in init_module()
290 	printk(KERN_INFO "wanpipe: Probing for WANPIPE hardware.\n");  in init_module()
293 …printk(KERN_INFO "wanpipe: Allocating maximum %i devices: wanpipe%i - wanpipe%i.\n",ncards,1,ncard…  in init_module()
295 		printk(KERN_INFO "wanpipe: No S514/S508 cards found, unloading modules!\n");  in init_module()
322 			printk(KERN_INFO  in init_module()
332 		printk(KERN_INFO "IN Init Module: NO Cards registered\n");  in init_module()
358 	printk(KERN_INFO "\nwanpipe: WANPIPE Modules Unloaded.\n");  in cleanup_module()
390 		printk(KERN_INFO   in setup()
398 	printk(KERN_INFO "%s: Starting WAN Setup\n", wandev->name);  in setup()
402 		printk(KERN_INFO "%s: failed sdlamain setup, busy!\n",  in setup()
407 	printk(KERN_INFO "\nProcessing WAN device %s...\n", wandev->name);  in setup()
418 		printk(KERN_INFO  in setup()
455 				printk(KERN_INFO "%s: Setting CPU to %c and Slot to Auto\n",  in setup()
458 				printk(KERN_INFO "%s: Setting CPU to %c and Slot to %i\n",  in setup()
484 			printk(KERN_INFO "%s: Hardware setup Failed %i\n",  in setup()
501 			printk(KERN_INFO "%s: Can't reserve IRQ %d!\n", wandev->name, irq);  in setup()
506 		printk(KERN_INFO "%s: Card Configured %i or Piggybacking %i!\n",  in setup()
515 		printk(KERN_INFO "%s: Initializing for SMP\n",wandev->name);  in setup()
546 		printk(KERN_INFO "%s: Starting X.25 Protocol Init.\n",  in setup()
552 		printk(KERN_INFO "%s: Starting Frame Relay Protocol Init.\n",  in setup()
558 		printk(KERN_INFO "%s: Starting PPP Protocol Init.\n",  in setup()
566 			printk(KERN_INFO "%s: Starting FT1 CSU/DSU Config Driver.\n",  in setup()
572 			printk(KERN_INFO "%s: Starting Multi-Port PPP Protocol Init.\n",  in setup()
578 			printk(KERN_INFO "%s: Starting CHDLC Protocol Init.\n",  in setup()
584 		printk(KERN_INFO "%s: Error, Firmware is not supported %X %X!\n",  in setup()
591 			printk(KERN_INFO   in setup()
594 			printk(KERN_INFO   in setup()
635 		printk(KERN_INFO  in check_s508_conflicts()
642 		printk(KERN_INFO "%s: can't configure without IRQ!\n",  in check_s508_conflicts()
701 				printk(KERN_INFO "%s: ERROR: Resource busy, ioport: 0x%x\n"  in check_s508_conflicts()
717 		printk(KERN_INFO  in check_s508_conflicts()
787 				printk(KERN_INFO "%s: ERROR: Resource busy: CPU %c PCISLOT %i\n"  in check_s514_conflicts()
829 			printk(KERN_INFO   in shutdown()
882 				printk(KERN_INFO "%s: Piggyback shutting down\n",card->devname);  in release_hw()
890 				printk(KERN_INFO "%s: Master shutting down\n",card->devname);  in release_hw()
897 			printk(KERN_INFO "%s: Device still running %i\n",  in release_hw()
903 		printk(KERN_INFO "%s: Master shutting down\n",card->devname);  in release_hw()
1148 					printk(KERN_INFO  in sdla_isr()
1151 					printk(KERN_INFO  in sdla_isr()
1158         	       		printk(KERN_INFO  in sdla_isr()
1192 			printk(KERN_INFO  in sdla_isr()
1249 			printk (KERN_INFO "%s: link connected!\n",  in wanpipe_set_state()
1254 			printk (KERN_INFO "%s: link connecting...\n",  in wanpipe_set_state()
1259 			printk (KERN_INFO "%s: link disconnected!\n",  in wanpipe_set_state()
1291 		printk(KERN_INFO "CRITICAL IN RUNNING TASK QUEUE\n");  in run_wanpipe_tq()
1300 		printk(KERN_INFO "CRITICAL IN QUEUING TASK\n");  in wanpipe_queue_tq()
1442 		printk(KERN_INFO "%s: Gateway added for %s\n",  in add_gateway()