137 #define DPRINTK(format, args...) printk("%s: " format, dev->name , ## args)  macro
372 		DPRINTK("ibmtr_probe1(): unhappy that inb(0x%X) == 0x%X, "  in ibmtr_probe1()
383 		DPRINTK("Cannot remap mmiobase memory area") ;   in ibmtr_probe1()
388 		DPRINTK("PIOaddr: %4hx seg/intr: %2x mmio base: %p intr: %d\n"  in ibmtr_probe1()
435 		DPRINTK( "Channel ID string not found for PIOaddr: %4hx\n",  in ibmtr_probe1()
437 		DPRINTK("Expected for ISA: ");  in ibmtr_probe1()
439 		DPRINTK("           found: ");  in ibmtr_probe1()
444 		DPRINTK("Expected for MCA: ");  in ibmtr_probe1()
508 			DPRINTK( "Hardware timeout during initialization.\n");  in ibmtr_probe1()
521 		DPRINTK("irq=%d", irq);  in ibmtr_probe1()
524 			DPRINTK(", ti->mmio=%p", ti->mmio);  in ibmtr_probe1()
621 			DPRINTK("Unknown shared ram paging info %01X\n",  in ibmtr_probe1()
630 			DPRINTK("Shared RAM paging code: %02X, "  in ibmtr_probe1()
650 			DPRINTK("Shared RAM for this adapter (%05x) exceeds "  in ibmtr_probe1()
666 		DPRINTK("Could not grab irq %d.  Halting Token Ring driver.\n",  in ibmtr_probe1()
675 		DPRINTK("Could not grab PIO range. Halting driver.\n");  in ibmtr_probe1()
686 	DPRINTK("%s %s found\n",  in ibmtr_probe1()
688 	DPRINTK("using irq %d, PIOaddr %hx, %dK shared RAM.\n",  in ibmtr_probe1()
690 	DPRINTK("Hardware address : %02X:%02X:%02X:%02X:%02X:%02X\n",  in ibmtr_probe1()
694 		DPRINTK("Shared RAM paging enabled. "  in ibmtr_probe1()
698 		DPRINTK("Shared RAM paging disabled. ti->page_mask %x\n",  in ibmtr_probe1()
771 	DPRINTK("Maximum Receive Internet Protocol MTU 16Mbps: %d, 4Mbps: %d\n",  in ibmtr_probe1()
864 		DPRINTK("Last time you were disconnected, how about now?\n");  in tok_open()
894 			DPRINTK("Adapter is up and running\n");  in tok_open()
902 	DPRINTK("TERMINATED via signal\n");	/*BMS useful */  in tok_open()
944 	DPRINTK("Opening adapter: Xmit bfrs: %d X %d, Rcv bfrs: %d X %d\n",  in tok_open_adapter()
1011 	DPRINTK("Setting functional address: ");  in tok_set_multicast_list()
1057 	DPRINTK("Adapter is closed.\n");  in tok_close()
1110 			DPRINTK("Adapter reopened.\n");  in dir_open_adapter()
1120 				DPRINTK("Open failed: Adapter speed must match "  in dir_open_adapter()
1125 				DPRINTK("Retrying open to adjust to "  in dir_open_adapter()
1128 			DPRINTK("Physical Insertion: No Monitor Detected, ");  in dir_open_adapter()
1132 			DPRINTK("Lobe Media Function Failure (0x11), ");  in dir_open_adapter()
1138 			DPRINTK("TR Adapter misc open failure, error code = ");  in dir_open_adapter()
1144         } else DPRINTK("open failed: ret_code = %02X..., ", ret_code);  in dir_open_adapter()
1154 	DPRINTK("FAILURE, CAPUT\n");  in dir_open_adapter()
1171 	DPRINTK("Int from tok_driver, dev : %p irq%d regs=%p\n", dev,irq,regs);  in tok_interrupt()
1217 		DPRINTK("Adapter check interrupt\n");  in tok_interrupt()
1218 		DPRINTK("8 reason bytes follow: ");  in tok_interrupt()
1224 		DPRINTK("ISRA_EVEN == 0x02%x\n",status);  in tok_interrupt()
1238 		DPRINTK("adapter error: ISRP_EVEN : %02x\n",  in tok_interrupt()
1243 		DPRINTK("ISRA_EVEN == 0x02%x\n",status);/*BMS*/  in tok_interrupt()
1254 		DPRINTK("SRB resp: cmd=%02X rsp=%02X\n",  in tok_interrupt()
1262 			DPRINTK("error on xmit_dir_frame request: %02X\n",  in tok_interrupt()
1279 			DPRINTK("error on xmit_ui_frame request: %02X\n",  in tok_interrupt()
1295 				DPRINTK("open_sap failed: ret_code = %02X, "  in tok_interrupt()
1317 				DPRINTK("error on %02X: %02X\n",  in tok_interrupt()
1323 				DPRINTK("error on dir_read_log: %02X\n",  in tok_interrupt()
1341 			DPRINTK("Line errors %02X, Internal errors %02X, "  in tok_interrupt()
1361 			DPRINTK("Unknown command %02X encountered\n",  in tok_interrupt()
1369 		DPRINTK("ASB resp: cmd=%02X\n", readb(ti->asb));  in tok_interrupt()
1378 			DPRINTK("unknown command in asb %02X\n",  in tok_interrupt()
1382 			DPRINTK("ASB error %02X in cmd %02X\n",  in tok_interrupt()
1393 		DPRINTK("ARB resp: cmd=%02X\n", readb(ti->arb));  in tok_interrupt()
1398 			DPRINTK("DLC_STATUS new status: %02X on station %02X\n",  in tok_interrupt()
1409 				DPRINTK("Ring Status Change...(0x%x)\n",  in tok_interrupt()
1414 				DPRINTK("Remove received, or Auto-removal error"  in tok_interrupt()
1416 				DPRINTK("We'll try to reopen the closed adapter"  in tok_interrupt()
1439 			DPRINTK("Unknown command %02X in arb\n",  in tok_interrupt()
1450 		DPRINTK("SSB resp: cmd=%02X rsp=%02X\n",  in tok_interrupt()
1459 				DPRINTK("xmit ret_code: %02X xmit error code: "  in tok_interrupt()
1466 			DPRINTK("xmit xid ret_code: %02X\n",  in tok_interrupt()
1469 			DPRINTK("Unknown command %02X in ssb\n",  in tok_interrupt()
1526 	DPRINTK("ti->init_srb_page=0x%x\n", ti->init_srb_page);  in initial_tok_int()
1527 	DPRINTK("init_srb(%x):", (ti->init_srb) );  in initial_tok_int()
1540 	DPRINTK("Initial interrupt : %d Mbps, shared RAM base %08x.\n",  in initial_tok_int()
1573 	if (readb(ti->asb+RETCODE_OFST) != 0xFF) DPRINTK("ASB not free !!!\n");  in tr_tx()
1698 	if (readb(ti->asb + RETCODE_OFST) !=0xFF) DPRINTK("ASB not free !!!\n");  in tr_rx()
1706 		DPRINTK("Linux cannot handle greater than 18 bytes RIF\n");  in tr_rx()
1716 	DPRINTK("offsetof data: %02X lan_hdr_len: %02X\n",  in tr_rx()
1718 	DPRINTK("llc: %08X rec_buf_addr: %04X dev->mem_start: %lX\n",  in tr_rx()
1720 	DPRINTK("dsap: %02X, ssap: %02X, llc: %02X, protid: %02X%02X%02X, "  in tr_rx()
1748 		DPRINTK("Probably non-IP frame received.\n");  in tr_rx()
1749 		DPRINTK("ssap: %02X dsap: %02X "  in tr_rx()
1766 		DPRINTK("out of memory. frame dropped.\n");  in tr_rx()
1800 			DPRINTK("CURIOUS, length=%d < rbuffer_len=%d\n",  in tr_rx()