216     uint32_t ret_val;  in e1000_phy_init_script()  local
519     int32_t ret_val;  in e1000_reset_hw()  local
852     int32_t ret_val;  in e1000_init_hw()  local
1057     int32_t  ret_val;  in e1000_adjust_serdes_amplitude()  local
1103     int32_t ret_val;  in e1000_setup_link()  local
1240     int32_t ret_val;  in e1000_setup_fiber_serdes_link()  local
1383     int32_t ret_val;  in e1000_copper_link_preconfig()  local
1443     int32_t ret_val;  in e1000_copper_link_igp_setup()  local
1589     int32_t ret_val;  in e1000_copper_link_ggp_setup()  local
1737     int32_t ret_val;  in e1000_copper_link_mgp_setup()  local
1841     int32_t ret_val;  in e1000_copper_link_autoneg()  local
1912     int32_t ret_val;  in e1000_copper_link_postconfig()  local
1950     int32_t ret_val;  in e1000_setup_copper_link()  local
2064     int32_t ret_val = E1000_SUCCESS;  in e1000_configure_kmrn_for_10_100()  local
2100     int32_t ret_val = E1000_SUCCESS;  in e1000_configure_kmrn_for_1000()  local
2137     int32_t ret_val;  in e1000_phy_setup_autoneg()  local
2287     int32_t ret_val;  in e1000_phy_force_speed_duplex()  local
2568     int32_t ret_val;  in e1000_config_mac_to_phy()  local
2693     int32_t ret_val;  in e1000_config_fc_after_link_up()  local
2904     int32_t ret_val;  in e1000_check_for_link()  local
3137     int32_t ret_val;  in e1000_get_speed_and_duplex()  local
3216     int32_t ret_val;  in e1000_wait_autoneg()  local
3468     uint32_t ret_val;  in e1000_read_phy_reg()  local
3606     uint32_t ret_val;  in e1000_write_phy_reg()  local
3792     int32_t ret_val;  in e1000_phy_hw_reset()  local
3884     int32_t ret_val;  in e1000_phy_reset()  local
3989     int32_t ret_val;  in e1000_kumeran_lock_loss_workaround()  local
4042     int32_t phy_init_status, ret_val;  in e1000_detect_gig_phy()  local
4138     int32_t ret_val;  in e1000_phy_reset_dsp()  local
4166     int32_t ret_val;  in e1000_phy_igp_get_info()  local
4243     int32_t ret_val;  in e1000_phy_ife_get_info()  local
4293     int32_t ret_val;  in e1000_phy_m88_get_info()  local
4372     int32_t ret_val;  in e1000_phy_get_info()  local
4440     int32_t ret_val = E1000_SUCCESS;  in e1000_init_eeprom_params()  local
6091     int32_t ret_val = E1000_SUCCESS;  in e1000_setup_led()  local
6184     int32_t ret_val = E1000_SUCCESS;  in e1000_cleanup_led()  local
6575     int32_t ret_val;  in e1000_get_bus_info()  local
6680     int32_t ret_val;  in e1000_get_cable_length()  local
6870     int32_t ret_val;  in e1000_check_polarity()  local
6945     int32_t ret_val;  in e1000_check_downshift()  local
6992     int32_t ret_val;  in e1000_config_dsp_after_link_change()  local
7179     int32_t ret_val;  in e1000_set_phy_mode()  local
7226     int32_t ret_val;  in e1000_set_d3_lplu_state()  local
7356     int32_t ret_val;  in e1000_set_d0_lplu_state()  local
7445     int32_t  ret_val;  in e1000_set_vco_speed()  local
7719     int32_t ret_val;  in e1000_mng_write_dhcp_info()  local
7772     int32_t ret_val, checksum;  in e1000_enable_tx_pkt_filtering()  local
7838     int32_t ret_val;  in e1000_polarity_reversal_workaround()  local
8940     uint32_t ret_val = E1000_SUCCESS;  in e1000_init_lcd_from_nvm_config_region()  local
8981     uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;  in e1000_init_lcd_from_nvm()  local