Lines Matching refs:was
241 much better if this code was placed in pc_init
273 1. A problem affecting hard flow control was found
278 incorrect. The solution was to change a line
285 2. In previous betas the cud device was set to CLOCAL
286 on driver boot up. Likewise the ttyD device was
297 0x1000) was used to reference our fbaud table a
328 ASYNC_NORMAL_ACTIVE. This code was redundant
333 was a CALLOUT device. CALLOUT devices never
334 block on CD. (This was a serious bug that
387 supported cards. (Code was also added to
413 the board was an XI or 64K XE. Furthermore since
421 the various boards. This code was necessary to
448 was changed to :
456 and 101a there was a line that looked like the
461 The problem with this line was that the first time
462 through omodem was not initialized. Secondly, since
465 could be lost. This line was changed to:
475 This was also done in prior versions but these
486 is being compiled into. Again this was done to
499 2. Removed BH handler code, as it was only handling