Lines Matching refs:can

21 	  You can then issue `cat /proc/bus/usb/devices` to extract
22 	  USB device information, and user mode drivers can use usbfs 
35 of the USB Guide can be found at http://www.linux-usb.org/
42 of these numbers are assigned sequentially, and can be reused, so
43 you can't rely on them for stable access to devices.  For example,
49 These files can be read as binary data.  The binary data consists
65 root, only root can write such user mode drivers.  You can selectively
90 (actually "printer.o") module.  USB device drivers can of course use any
100 can obtain some useful data from it without the use of an
103 Lev, Prnt, Port, Cnt) can be used to build a USB topology diagram.
209 |      can't be shared with any other device.
227     one device configuration can be active at a time; most devices
237 Interface descriptor info (can be multiple per Config):
260 Endpoint descriptor info (can be multiple per Interface):
275     endpoints, that can reflect two or three packets (for up to
279     transfer intervals and sizes provided by URBs, which can be less
289 "grep -i ^[tdp]: /proc/bus/usb/devices" can be used to list
292 script, it can display any selected lines (for example, only T, D,
298 The Topology lines can be used to generate a graphic/pictorial
302 The Interface lines can be used to determine what driver is