Lines Matching refs:use
57 the adapter to use the AUI interface instead of the 10 Base T
58 interface. This is also what to do if you want to use the BNC
71 5. You have to use speed=X duplex=Y together now. If you just
76 6. If the driver is built into the kernel, you can use the 3rd
88 0x02 = use half duplex
89 0x04 = use full duplex
90 0x08 = use 10BaseT
91 0x10 = use 100BaseTx
98 use the above options on a per adapter basis. To force a 100Mbit/HD
99 link with your eth1 adapter use:
103 Now eth0 will use auto-neg and eth1 will be forced to 100Mbit/HD.