Lines Matching refs:parameter

189         modprobe sk98lin parameter=value1[,value2[,value3...]]
216 which you set the parameter (A or B).
224 This parameter is used to set the speed capabilities. It is only valid 
228 with this parameter.
248 This parameter is usefull if your link partner does not support all
257 This parameter can be used to set the flow control capabilities the 
269 NOTE: This parameter is ignored if auto-negotiation is set to "Off".
277 This parameter is only valid for the SK-9821 and SK-9822 adapters.
282 with this parameter.
294 The parameter 'ConType' is a combination of all five per-port parameters
295 within one single parameter. This simplifies the configuration of both ports
310 Stating any other port parameter together with this 'ConType' variable
315 NOTE: This parameter is always used on both ports of the adapter card.
327 'IntsPerSec' parameter, which is explained later below.
367 This parameter is only used, if either static or dynamic interrupt moderation
371 This parameter determines the length of any interrupt moderation interval. 
373 parameter value of 2000 will lead to an interrupt moderation interval of