Lines Matching refs:interface

400 conf/interface/*  changes special settings per interface (where "interface" is 
401 		  the name of your network interface)
407 	log_martians for the interface will be enabled if at least one of
408 	conf/{all,interface}/log_martians is set to TRUE,
413 	accept_redirects for the interface will be enabled if:
414 	- both conf/{all,interface}/accept_redirects are TRUE in the case forwarding
415 	  for the interface is enabled
417 	- at least one of conf/{all,interface}/accept_redirects is TRUE in the case
418 	  forwarding for the interface is disabled
419 	accept_redirects for the interface will be disabled otherwise
424 	Enable IP forwarding on this interface.
430 	for the interface
436 	The default value 0 means that the device is the only interface
445 	proxy_arp for the interface will be enabled if at least one of
446 	conf/{all,interface}/proxy_arp is set to TRUE,
452 	shared_media for the interface will be enabled if at least one of
453 	conf/{all,interface}/shared_media is set to TRUE,
460 	secure_redirects for the interface will be enabled if at least one of
461 	conf/{all,interface}/secure_redirects is set to TRUE,
467 	send_redirects for the interface will be enabled if at least one of
468 	conf/{all,interface}/send_redirects is set to TRUE,
477 	for the interface
484 	with SRR option on the interface
498 	on the interface
505 	subnet, and have the ARPs for each interface be answered
507 	the ARP'd IP out that interface (therefore you must use source
518 	arp_filter for the interface will be enabled if at least one of
519 	conf/{all,interface}/arp_filter is set to TRUE,
525 	interface:
526 	0 - (default) Use any local address, configured on any interface
528 	subnet for this interface. This mode is useful when target
529 	hosts reachable via this interface require the source IP
531 	configured on the receiving interface. When we generate the
541 	interface that include the target IP address. If no suitable
543 	we have on the outgoing interface or on all other interfaces,
547 	The max value from conf/{all,interface}/arp_announce is used.
557 	on any interface
559 	configured on the incoming interface
561 	configured on the incoming interface and both with the
562 	sender's IP address are part from same subnet on this interface
568 	The max value from conf/{all,interface}/arp_ignore is used
569 	when ARP request is received on the {interface}
606 	Change the interface-specific default settings.
610 	Change all the interface-specific settings.  
625 conf/interface/*:
626 	Change special settings per interface.
655 	Configure interface-specific Host/Router behaviour.  
692 	Number of seconds to wait after interface is brought up