Lines Matching refs:test

458 the CS8900/20 Setup Utility can be used to test the functionality of the 
460 test the functionality of the adapter with the hardware configuration you have
461 assigned. You can use the diagnostics 'Network Test' to test the ability of the
479        * Select 'Self-Test' to test the adapter's basic functionality.
480        * Select 'Network Test' to test the network connection and cabling.
485 The diagnostic self-test checks the adapter's basic functionality as well as 
490      The IO Register Read/Write test insures that the CS8900/20 can be 
494      The Shared Memory test insures the CS8900/20 can be accessed in memory 
499      The Interrupt test insures there are no conflicts with the assigned IRQ
503      The EEPROM test insures the EEPROM can be read.
506      The Chip RAM test insures the 4K of memory internal to the CS8900/20 is
510      The Internal Loop Back test insures the adapter's transmitter and 
511      receiver are operating properly.  If this test fails, make sure the 
516      The Boot PROM  test insures the Boot PROM is present, and can be read.
522 Failure of a test item indicates a possible system resource conflict with 
532 on the same network. (Note: the diagnostic network test should not be run 
535 This test requires that each of the two PCs have a CS8900/20-based adapter
543 transmitted OK or in error.  The test can be terminated anytime by the user at 
553     2.) Return to the PC with the CS8900/20-based adapter you want to test and
557         Hit ENTER to start the test.
559 You may stop the test on the Initiator at any time while allowing the Responder
560 to continue running.  In this manner, you can move to additional PCs and test 
597 diagnostic self-test.  Normally, the ISA resource in conflict will fail the 
598 self-test.  If so, reconfigure the adapter selecting another choice for the 
605 diagnostics self-test to ensure the new configuration is free of conflicts