Lines Matching refs:EEPROM

147 stored in an on-board EEPROM. You must use the DOS-based CS8900/20 Setup 
148 Utility if you want to change the adapter's configuration in EEPROM.  
151 configuration parameters on the command-line to override the EEPROM's settings 
152 or for interface configuration when an EEPROM is not used. (CS8920-based 
153 adapters must use an EEPROM.) See Section 3.0 LOADING THE DRIVER AS A MODULE.
210 provides a means to override the EEPROM's settings or for interface 
211 configuration when an EEPROM is not used.
239 a) If an EEPROM is present, any specified command-line parameter
241    EEPROM.
260 e) The minimum command-line configuration required if an EEPROM is
268    used with no EEPROM or command-line argument).
319    from the card's EEPROM.
502    * EEPROM Test
503      The EEPROM test insures the EEPROM can be read.
697 For use in embedded environments with no cs89x0 EEPROM, the kernel boot