Lines Matching refs:proc

39 This creates the /proc/comx directory.
42 /proc INTERFACE INTRO
44 The COMX driver set has a new type of user interface based on the /proc 
48 and 'route' etc.) has a corresponding directory under /proc/comx. You can
49 dynamically create a new interface by saying 'mkdir /proc/comx/comx0' (or you
80 mkdir /proc/comx/comx0
81 echo comx >/proc/comx/comx0/boardtype
82 echo 0x360 >/proc/comx/comx0/io		<- jumper-selectable I/O port 
83 echo 0x0a >/proc/comx/comx0/irq		<- jumper-selectable IRQ line
84 echo 0xd000 >/proc/comx/comx0/memaddr	<- software-configurable memory
89 cat </etc/siol1.rom >/proc/comx/comx0/firmware <- the firmware for the card
90 echo HDLC >/proc/comx/comx0/protocol	<- the data-link protocol
91 echo 10 >/proc/comx/comx0/keepalive	<- the keepalive for the protocol
95 cat /proc/comx/comx0/status
99 mkdir /proc/comx/comx1
100 echo comx >/proc/comx/comx1/boardtype
101 echo 0x360 >/proc/comx/comx1/io	
102 echo 10 >/proc/comx/comx1/irq		
103 echo 0xd000 >/proc/comx/comx1/memaddr
104 echo 1 >/proc/comx/comx1/channel	<- channels are numbered 
110 cat /proc/comx/comx0/twin
112 cat /proc/comx/comx1/twin
116 an adapter, just write it into the channel 0's /proc firmware file.
167 echo hdlc >/proc/comx/comx0/protocol
168 echo 10 >/proc/comx/comx0/keepalive	<- not necessary, 10 is the default
174 echo ppp >/proc/comx/comx0/protocol
193 echo lapb >/proc/comx/comx0/protocol
194 echo dce >/proc/comx/comx0/mode		<- DCE interface in this example
220 FURTHER /proc FILES
231 'cat /proc/comx/comx3/status'.
246 tail -f /proc/comx/comx2/debug