Lines Matching refs:miimon

197 It is critical that either the miimon or arp_interval and arp_ip_target
210         with miimon. A value of 0 disables ARP monitoring. The default value
225         link failure has been detected. This should be a multiple of miimon
246 miimon
385         link up status has been detected. This should be a multiple of miimon
390         Specifies whether or not miimon should use MII or ETHTOOL
428 options bond0 miimon=100
467 (b) discontinue the ARP monitor (using miimon as an alternative, for
516 parameters of mode=0 and miimon=1000 is shown below.
719 miimon value.
723 check interval is specified by the module argument "miimon" (MII monitoring).
732    # modprobe bonding miimon=100
737    options bond0 miimon=100
770      # modprobe bonding miimon=100
784      # modprobe bonding miimon=100           # set up a trunk on port1
801     # modprobe bonding miimon=100 mode=active-backup
805     # modprobe bonding miimon=100 mode=1
810     options bond0 miimon=100 mode=active-backup
862      # modprobe bonding miimon=100 mode=1     # (optional) minimize the time
877 milliseconds, must be a multiple of miimon).
883 (in milliseconds, must be a multiple of miimon).
896     # modprobe bonding miimon=100 mode=1 downdelay=2000 updelay=5000
897     # modprobe bonding miimon=100 mode=balance-rr downdelay=0 updelay=5000