Lines Matching refs:cable
46 even if it can't possibly be delivered properly (ie. because of a cable
94 For a coax network, you "should" use 93 Ohm RG-62 cable. But other cables
96 Ohm TV antenna cable.
130 (Avery's note: oops, I didn't know that. Mine (TV cable) works
157 difference is in cable and terminators: they should be 93 Ohm. Ethernet
159 line of cable, the bus. You have to put terminators at both ends of the
160 cable. A typical BUS ARCnet network looks like:
186 anywhere in middle of a cable in a STAR topology network. And more - you
206 then daisy-chained together using a cable connecting every two neighboring
233 Like any network, ARCnet has a limited cable length. These are the maximum
234 cable lengths between two active ends (an active end being an active hub or
248 of a TP cable between two cards/hubs is 650 meters.
354 OFF Short flashes Cabling problems (broken cable or not
426 cable-connector and it's for changing to star or bus topology;
552 standard BNC female connector for connection to RG-62/U coax cable.
764 to RG-62/U coax cable.
1156 - If using coax cable in a bus topology the J4 jumper must be removed;