Lines Matching refs:Memory

458 (I/O and Memory        |  1  1 * 0  0  0  0 * 1  1  0  1  |
594 	4-6:	Memory Base Address Select
637 Setting the Base Memory (RAM) buffer Address
1033 SW2: DIP-Switches for Memory Base and I/O Base addresses
1229 	Memory Switch 0 (MS0) didn't seem to work properly when set to OFF
1235 	43210           Memory address
1316 S1  1-5:    Base Memory Address Select
1394 Setting the Base Memory (RAM) buffer Address
1400 Switches 1-5 of switch block SW1 select the Memory Base address.
1533     7-10:   Base Memory Address Select
1606 Setting the Base Memory (RAM) buffer Address
1609 The switches 7-10 of switch block SW1 are used to select the Memory
1691 SW 1    : Shared Memory Address and I/O Base
1695         12345|Memory Address
1797     7-10    Memory Address Select
1855 Setting the Base Memory (RAM) buffer Address
1862 Jumpers 7-10 of switch block SW1 select the Memory Base address.
1939 SW1 1-5:    Base Memory Address Select
1993 Setting the Base Memory (RAM) buffer Address
1999 Jumpers 3-5 of switch block SW1 select the Memory Base address.
2079 SW1 1-5     Base Memory Address Select
2133 Setting the Base Memory (RAM) buffer Address
2139 Jumpers 3-5 of switch block SW1 select the Memory Base address.
2424     4-6:    Memory Base Address Select
2495 Setting the Base Memory (RAM) buffer Address
2684 Setting the Base Memory (RAM) buffer Address
2788 SW1 1-5:    Base Memory Address Select
2865 Setting the Base Memory (RAM) buffer Address
2871 Jumpers 3-5 of jumper block SW1 select the Memory Base address.
2956 SW2	1-3:    Memory Buffer/PROM Address
2998 Setting the Base Memory Address (RAM & ROM)
3091 Top Jumper line Bit 7 = ROM Enable 654=Memory location 321=I/O
3093 Settings for Memory Location (Top Jumper Line)