Lines Matching refs:cable

22 LapLink null-printer cable [can also work in turbo mode, with a PLIP
23 cable]. [The protocol used to pack IP packages, is a simple one
31 The PLIP cable is all that's needed to connect two Linux boxes, and it
68 PLIP driver is signaled whenever data is sent to it via the cable, such that
114 printer "null" cable to transfer data four bits at a time using
125 The cable for the first transfer mode is a standard
126 printer "null" cable which transfers data four bits at a time using
133 A cable that implements this protocol is available commercially as a
134 "Null Printer" or "Turbo Laplink" cable.  It can be constructed with
151 If the cable you are using has a metallic shield it should be
160 nibbles into bytes.  This cable should not be used on unidirectional
165 The cable for this transfer mode should be constructed as follows:
184 Once again, if the cable you are using has a metallic shield it should