Lines Matching refs:use

3 DataCommute/BRI and TeleCommute/BRI adapters only and any other use is 
28 	 1.3 How do I setup my system with the correct software to use
54 ISDN4Linux is a driver and set of tools used to access and use ISDN devices
56 protocols and offers channel bundling and MLPPP support. To use ISDN4Linux
72 	  configuration. All adapters now use only 16Kbytes of shared RAM
92 1.3 How do I setup my system with the correct software to use
95 Before you can compile, install and use the SpellCaster ISA ISDN driver, you
138 you can specify but you shouldn't need to use any unless this doesn't work.
161 resources available, use the insmod options detailed in sc(4) to override
168 reserved for ISA use only.   
173 There are three main configurations which you can use with the driver:
179 It should be mentioned here that you may also use a tty connection if you
202 	viii) use the ifconfig command to bring up the network interface with 
218 	use the same procedure as in the HDLC connection from steps i) to 
225 	xi)   use the ipppd function found in /sbin/ipppd to set the following:
255 	x)   use the ifconfig command to bring-up the ippp0 interface with a 
258 	xii) use the ipppd function found in /sbin/ipppd to set the following:
264 NOTE:  To use the MLPPP connection to dial OUT to a MLPPP connection, change