Lines Matching refs:can

24 setserial.  A multiport card can be forced into DMA mode by using setserial;
43 If the driver is compiled as a module, the IRQs to use can be specified by
49 nonexistent cards can be set to 0.  If an IRQ of a card that does exist is set
55 The custom divisor can be set by using the divisor= option.  The format is the
67 The dma= option can be used to set the DMA channel.  The channel can be either
73 The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger
82 The flow_off= and flow_on= options can be used to set the hardware flow off/
91 The rx_timeout= option can be used to set the receive timeout value.  This
106 Multiple options can be listed on the insmod command line by separating each
111 The esp module can be automatically loaded when needed.  To cause this to
145 The ESP module and the serial module should not conflict (they can be used at