Lines Matching refs:an

16 To use this, you need an interface to an IPMI controller in your
37 provides the kernelland interface for IPMI, but does not provide an
42 as an IPMI user.
61 The IPMI addressing works much like IP addresses, you have an overlay
196 From userland, you fill out an ipmi_req_t structure and use the
205 If the message cannot fit into the data you provide, you will get an
215 timed out.  If an unsolicited response comes in (if it was after 5
223 Note that when sending, there is an ipmi_request_supply_msgs() call
258 message handler, each of these is assigned an interface number when
260 in the order they register, although if an SMI unregisters and then
332 The preaction may be "pre_smi" for an indication through the SMI
333 interface, "pre_int" for an indication through the SMI with an
341 because you can't do data operations from an NMI.
352 The options are the actions and preaction above (if an option